problem adding a user
I'm trying to use the example in "Embedded Linux Systems with the Yocto Project" to add a user to my Yocto build. In the book the sample code:
useradd -p `openssl passwd ${DEV_PASSWORD}` developer; \uses openssl to generate the encrypted password string to pass to useradd. I have never been able to get this to work. When I run the openssl command on the cmd line I get a different value every time, this seems wrong, How can the password code compare against it if every encode produces a different value?
I am getting the user added to the system, the home directory shows up and the user is in the passwd and group files. I just can't login to the account.
I've obviously got something confused, any help would be appreciated.
Greg Wilson-Lindberg
Quoted 8 lines · Greg Wilson-Lindberg
I'm trying to use the example in "Embedded Linux Systems with the Yocto Project" to add a user to my Yocto build. In the book the sample code:
useradd -p `openssl passwd ${DEV_PASSWORD}` developer; \uses openssl to generate the encrypted password string to pass to useradd. I have never been able to get this to work. When I run the openssl command on the cmd line I get a different value every time, this seems wrong, How can the password code compare against it if every encode produces a different value?
Quoted 7 lines
I am getting the user added to the system, the home directory shows up and the user is in the passwd and group files. I just can't login to the account.
I've obviously got something confused, any help would be appreciated.
Greg Wilson-Lindberg
You could just use something like:
useradd -P 123456 developer
Best Regards,
Chen Qi
Hi Greg,
Well, I suppose I wrote the book you are referring to...
Using
useradd -p PASSWORD USER
takes the password hash for PASSWORD hence the use of openssl in:
useadd -p openssl passwd PASSWORD USER
openssl password creates the password hash using the original crypt hash algorithm if no other options are specified. e.g.
$ openssl passwd hello 6hEsTksgRkeiI
With this the first two characters of the output is the salt and the rest is the password hash. If you want openssl to create the same result again:
$ openssl passwd -salt "6h" hello 6hEsTksgRkeiI
You can use newer algorithms like MD5 based BSD password algorithm 1:
$ openssl passwd -1 hello $1$4Mu8Fcs.$eIKgPP7RCYrb3lFZjhADA1
$1 : password algorithm 1
$4Mu8Fcs. : salt
$eIKgPP7RCYrb3lFZjhADA1 : password hash
If you log into the system you have to use the clear password. The system reads the salt, creates the password hash and compares the results.
:rjs
Quoted 15 lines · Greg Wilson-Lindberg
I'm trying to use the example in "Embedded Linux Systems with the Yocto Project" to add a user to my Yocto build. In the book the sample code:
useradd -p `openssl passwd ${DEV_PASSWORD}` developer; \uses openssl to generate the encrypted password string to pass to useradd. I have never been able to get this to work. When I run the openssl command on the cmd line I get a different value every time, this seems wrong, How can the password code compare against it if every encode produces a different value?
I am getting the user added to the system, the home directory shows up and the user is in the passwd and group files. I just can't login to the account.
I've obviously got something confused, any help would be appreciated.
Greg Wilson-Lindberg
Signature · 4 lines
----- Rudolf J Streif CEO/CTO ibeeto +1.855.442.3396 x700
Hi Rudolf,
Thanks for the reply, and the information on how openssl works.
I'm trying to create a user with the same group name so the code that I'm using reduces to:
EXTRA_USERS_PARAMS = "\
useradd -p `openssl passwd test` sakura; \
usermod -a -G sudo ${SAKURA_USER}; \
"I also, as you can see, removed the macros to eliminate as much confusion as possible.
I still can't login in using the password 'test'.
I've also tried both the back-quote and the single-quote, no difference.
Regards,
Greg
________________________________
From: Rudolf J Streif <[email protected]>
Sent: Wednesday, May 15, 2019 10:07:47 AM
To: Greg Wilson-Lindberg; Yocto list discussion
Subject: Re: [yocto] problem adding a user
Hi Greg,
Well, I suppose I wrote the book you are referring to...
Using
useradd -p PASSWORD USER
takes the password hash for PASSWORD hence the use of openssl in:
useadd -p openssl passwd PASSWORD USER
openssl password creates the password hash using the original crypt hash algorithm if no other options are specified. e.g.
$ openssl passwd hello 6hEsTksgRkeiI
With this the first two characters of the output is the salt and the rest is the password hash. If you want openssl to create the same result again:
$ openssl passwd -salt "6h" hello 6hEsTksgRkeiI
You can use newer algorithms like MD5 based BSD password algorithm 1:
$ openssl passwd -1 hello $1$4Mu8Fcs.$eIKgPP7RCYrb3lFZjhADA1
$1 : password algorithm 1
$4Mu8Fcs. : salt
$eIKgPP7RCYrb3lFZjhADA1 : password hash
If you log into the system you have to use the clear password. The system reads the salt, creates the password hash and compares the results.
:rjs
Quoted 8 lines · Greg Wilson-Lindberg
I'm trying to use the example in "Embedded Linux Systems with the Yocto Project" to add a user to my Yocto build. In the book the sample code:
useradd -p `openssl passwd ${DEV_PASSWORD}` developer; \uses openssl to generate the encrypted password string to pass to useradd. I have never been able to get this to work. When I run the openssl command on the cmd line I get a different value every time, this seems wrong, How can the password code compare against it if every encode produces a different value?
Quoted 7 lines
I am getting the user added to the system, the home directory shows up and the user is in the passwd and group files. I just can't login to the account.
I've obviously got something confused, any help would be appreciated.
Greg Wilson-Lindberg
--
-----
Rudolf J Streif
CEO/CTO ibeeto
+1.855.442.3396 x700
Hi Greg,
Quoted 1 line
I've also tried both the back-quote and the single-quote, no difference.
Help me to understand this. the back-quotes are the right ones. If you use the single ones your password in the /etc/shadow ends up being 'openssl passwd test' (without the quotes), unless the build fails because of a parsing error (I have not tried it). Silly question, you did inherit extrausers class?
Can you post your /etc/passwd and /etc/shadow
I am surprised that this does not work with your setup. I have been doing this a gazillion times always with success.
:rjs
Quoted 100 lines · Greg Wilson-Lindberg
Hi Rudolf,
Thanks for the reply, and the information on how openssl works.
I'm trying to create a user with the same group name so the code that I'm using reduces to:
EXTRA_USERS_PARAMS = "\ useradd -p `openssl passwd test` sakura; \ usermod -a -G sudo ${SAKURA_USER}; \ "I also, as you can see, removed the macros to eliminate as much confusion as possible.
I still can't login in using the password 'test'.
I've also tried both the back-quote and the single-quote, no difference.
Regards,
Greg
------------------------------------------------------------------------
*From:* Rudolf J Streif <[email protected]> *Sent:* Wednesday, May 15, 2019 10:07:47 AM *To:* Greg Wilson-Lindberg; Yocto list discussion *Subject:* Re: [yocto] problem adding a user Hi Greg,Well, I suppose I wrote the book you are referring to...
Using
useradd -p PASSWORD USER
takes the password hash for PASSWORD hence the use of openssl in:
useadd -p
openssl passwd PASSWORDUSERopenssl password creates the password hash using the original crypt hash algorithm if no other options are specified. e.g.
$ openssl passwd hello 6hEsTksgRkeiIWith this the first two characters of the output is the salt and the rest is the password hash. If you want openssl to create the same result again:
$ openssl passwd -salt "6h" hello 6hEsTksgRkeiIYou can use newer algorithms like MD5 based BSD password algorithm 1:
$ openssl passwd -1 hello $1$4Mu8Fcs.$eIKgPP7RCYrb3lFZjhADA1$1 : password algorithm 1
$4Mu8Fcs. : salt
$eIKgPP7RCYrb3lFZjhADA1 : password hashIf you log into the system you have to use the clear password. The system reads the salt, creates the password hash and compares the results.
:rjs
Quoted 1 line · Greg Wilson-Lindberg
I'm trying to use the example in "Embedded Linux Systems with the
Yocto Project" to add a user to my Yocto build. In the book the sample code:
Quoted 4 lines
useradd -p
openssl passwd ${DEV_PASSWORD}developer; \uses openssl to generate the encrypted password string to pass to
useradd. I have never been able to get this to work. When I run the openssl
Quoted 1 line
command on the cmd line I get a different value every time, this
seems wrong, How can the password code compare against it if every encode
Quoted 3 lines
produces a different value?
I am getting the user added to the system, the home directory shows
up and the user is in the passwd and group files. I just can't login to the
Quoted 6 lines
account.
I've obviously got something confused, any help would be appreciated.
Greg Wilson-Lindberg
Signature · 4 lines
----- Rudolf J Streif CEO/CTO ibeeto +1.855.442.3396 x700
Signature · 4 lines
----- Rudolf J Streif CEO/CTO ibeeto +1.855.442.3396 x700
Hi Rudolf,
1st, yes I inherit extrausers. Attached are the passwd & shadow files.
It shouldn't make any difference, but I'm building this for an RPi3 using the Qt Boot2Qt version of the Yocto environment, distro 2.5.3.
Greg
________________________________
From: Rudolf J Streif <[email protected]>
Sent: Wednesday, May 15, 2019 11:26 AM
To: Greg Wilson-Lindberg; Yocto list discussion
Subject: Re: [yocto] problem adding a user
Hi Greg,
Quoted 1 line
I've also tried both the back-quote and the single-quote, no difference.
Help me to understand this. the back-quotes are the right ones. If you use the single ones your password in the /etc/shadow ends up being 'openssl passwd test' (without the quotes), unless the build fails because of a parsing error (I have not tried it). Silly question, you did inherit extrausers class?
Can you post your /etc/passwd and /etc/shadow
I am surprised that this does not work with your setup. I have been doing this a gazillion times always with success.
:rjs
On 5/15/19 11:03 AM, Greg Wilson-Lindberg wrote:
Hi Rudolf,
Thanks for the reply, and the information on how openssl works.
I'm trying to create a user with the same group name so the code that I'm using reduces to:
EXTRA_USERS_PARAMS = "\
useradd -p `openssl passwd test` sakura; \
usermod -a -G sudo ${SAKURA_USER}; \
"I also, as you can see, removed the macros to eliminate as much confusion as possible.
I still can't login in using the password 'test'.
I've also tried both the back-quote and the single-quote, no difference.
Regards,
Greg
________________________________
From: Rudolf J Streif <[email protected]><mailto:[email protected]>
Sent: Wednesday, May 15, 2019 10:07:47 AM
To: Greg Wilson-Lindberg; Yocto list discussion
Subject: Re: [yocto] problem adding a user
Hi Greg,
Well, I suppose I wrote the book you are referring to...
Using
useradd -p PASSWORD USER
takes the password hash for PASSWORD hence the use of openssl in:
useadd -p openssl passwd PASSWORD USER
openssl password creates the password hash using the original crypt hash algorithm if no other options are specified. e.g.
$ openssl passwd hello 6hEsTksgRkeiI
With this the first two characters of the output is the salt and the rest is the password hash. If you want openssl to create the same result again:
$ openssl passwd -salt "6h" hello 6hEsTksgRkeiI
You can use newer algorithms like MD5 based BSD password algorithm 1:
$ openssl passwd -1 hello $1$4Mu8Fcs.$eIKgPP7RCYrb3lFZjhADA1
$1 : password algorithm 1
$4Mu8Fcs. : salt
$eIKgPP7RCYrb3lFZjhADA1 : password hash
If you log into the system you have to use the clear password. The system reads the salt, creates the password hash and compares the results.
:rjs
Quoted 8 lines · Greg Wilson-Lindberg
I'm trying to use the example in "Embedded Linux Systems with the Yocto Project" to add a user to my Yocto build. In the book the sample code:
useradd -p `openssl passwd ${DEV_PASSWORD}` developer; \uses openssl to generate the encrypted password string to pass to useradd. I have never been able to get this to work. When I run the openssl command on the cmd line I get a different value every time, this seems wrong, How can the password code compare against it if every encode produces a different value?
Quoted 7 lines
I am getting the user added to the system, the home directory shows up and the user is in the passwd and group files. I just can't login to the account.
I've obviously got something confused, any help would be appreciated.
Greg Wilson-Lindberg
--
-----
Rudolf J Streif
CEO/CTO ibeeto
+1.855.442.3396 x700
--
-----
Rudolf J Streif
CEO/CTO ibeeto
+1.855.442.3396 x700
The ! for the password in /etc/shadow indicates that the account is disabled:
sakura:!:18031:0:99999:7:::
Either there is something wrong with the password generation or it gets disabled by something else. Maybe it's worth trying with a plain image without Boot2Qt or anything else.
:rjs
Quoted 143 lines · Greg Wilson-Lindberg
Hi Rudolf,
1st, yes I inherit extrausers. Attached are the passwd & shadow files.
It shouldn't make any difference, but I'm building this for an RPi3 using the Qt Boot2Qt version of the Yocto environment, distro 2.5.3.
Greg
------------------------------------------------------------------------
*From:* Rudolf J Streif <[email protected]> *Sent:* Wednesday, May 15, 2019 11:26 AM *To:* Greg Wilson-Lindberg; Yocto list discussion *Subject:* Re: [yocto] problem adding a userHi Greg,
Quoted 1 line
I've also tried both the back-quote and the single-quote, no difference.
Help me to understand this. the back-quotes are the right ones. If you use the single ones your password in the
/etc/shadowends up being 'openssl passwd test' (without the quotes), unless the build fails because of a parsing error (I have not tried it). Silly question, you did inherit extrausers class?Can you post your
/etc/passwdand/etc/shadowI am surprised that this does not work with your setup. I have been doing this a gazillion times always with success.
:rjs
Quoted 100 lines · Greg Wilson-Lindberg
Hi Rudolf,
Thanks for the reply, and the information on how openssl works.
I'm trying to create a user with the same group name so the code that I'm using reduces to:
EXTRA_USERS_PARAMS = "\ useradd -p `openssl passwd test` sakura; \ usermod -a -G sudo ${SAKURA_USER}; \ "I also, as you can see, removed the macros to eliminate as much confusion as possible.
I still can't login in using the password 'test'.
I've also tried both the back-quote and the single-quote, no difference.
Regards,
Greg
------------------------------------------------------------------------
*From:* Rudolf J Streif <[email protected]> *Sent:* Wednesday, May 15, 2019 10:07:47 AM *To:* Greg Wilson-Lindberg; Yocto list discussion *Subject:* Re: [yocto] problem adding a user Hi Greg,Well, I suppose I wrote the book you are referring to...
Using
useradd -p PASSWORD USER
takes the password hash for PASSWORD hence the use of openssl in:
useadd -p
openssl passwd PASSWORDUSERopenssl password creates the password hash using the original crypt hash algorithm if no other options are specified. e.g.
$ openssl passwd hello 6hEsTksgRkeiIWith this the first two characters of the output is the salt and the rest is the password hash. If you want openssl to create the same result again:
$ openssl passwd -salt "6h" hello 6hEsTksgRkeiIYou can use newer algorithms like MD5 based BSD password algorithm 1:
$ openssl passwd -1 hello $1$4Mu8Fcs.$eIKgPP7RCYrb3lFZjhADA1$1 : password algorithm 1
$4Mu8Fcs. : salt
$eIKgPP7RCYrb3lFZjhADA1 : password hashIf you log into the system you have to use the clear password. The system reads the salt, creates the password hash and compares the results.
:rjs
Quoted 1 line · Greg Wilson-Lindberg
I'm trying to use the example in "Embedded Linux Systems with the
Yocto Project" to add a user to my Yocto build. In the book the sample code:
Quoted 4 lines
useradd -p
openssl passwd ${DEV_PASSWORD}developer; \uses openssl to generate the encrypted password string to pass to
useradd. I have never been able to get this to work. When I run the openssl
Quoted 1 line
command on the cmd line I get a different value every time, this
seems wrong, How can the password code compare against it if every encode
Quoted 3 lines
produces a different value?
I am getting the user added to the system, the home directory shows
up and the user is in the passwd and group files. I just can't login to the
Quoted 6 lines
account.
I've obviously got something confused, any help would be appreciated.
Greg Wilson-Lindberg
Signature · 4 lines
----- Rudolf J Streif CEO/CTO ibeeto +1.855.442.3396 x700Signature · 4 lines
----- Rudolf J Streif CEO/CTO ibeeto +1.855.442.3396 x700
Signature · 4 lines
----- Rudolf J Streif CEO/CTO ibeeto +1.855.442.3396 x700
Ok, I had been using the useradd class in a couple of other recipes to allow me to copy files to the sakura user directory and another location, but owned by sakura. That seems to have been what was causing the problem.
I had been using the extrausers class in my top level image recipe.
So now how do I get all of this to work together? Do I need to put everything that touches the sakura user in the same recipe? It seems that I need to use only one of the useradd or extrausers classes?
Greg
________________________________
From: Rudolf J Streif <[email protected]>
Sent: Wednesday, May 15, 2019 12:31 PM
To: Greg Wilson-Lindberg; Yocto list discussion
Subject: Re: [yocto] problem adding a user
The ! for the password in /etc/shadow indicates that the account is disabled:
sakura:!:18031:0:99999:7:::
Either there is something wrong with the password generation or it gets disabled by something else. Maybe it's worth trying with a plain image without Boot2Qt or anything else.
:rjs
On 5/15/19 11:46 AM, Greg Wilson-Lindberg wrote:
Hi Rudolf,
1st, yes I inherit extrausers. Attached are the passwd & shadow files.
It shouldn't make any difference, but I'm building this for an RPi3 using the Qt Boot2Qt version of the Yocto environment, distro 2.5.3.
Greg
________________________________
From: Rudolf J Streif <[email protected]><mailto:[email protected]>
Sent: Wednesday, May 15, 2019 11:26 AM
To: Greg Wilson-Lindberg; Yocto list discussion
Subject: Re: [yocto] problem adding a user
Hi Greg,
Quoted 1 line
I've also tried both the back-quote and the single-quote, no difference.
Help me to understand this. the back-quotes are the right ones. If you use the single ones your password in the /etc/shadow ends up being 'openssl passwd test' (without the quotes), unless the build fails because of a parsing error (I have not tried it). Silly question, you did inherit extrausers class?
Can you post your /etc/passwd and /etc/shadow
I am surprised that this does not work with your setup. I have been doing this a gazillion times always with success.
:rjs
On 5/15/19 11:03 AM, Greg Wilson-Lindberg wrote:
Hi Rudolf,
Thanks for the reply, and the information on how openssl works.
I'm trying to create a user with the same group name so the code that I'm using reduces to:
EXTRA_USERS_PARAMS = "\
useradd -p `openssl passwd test` sakura; \
usermod -a -G sudo ${SAKURA_USER}; \
"I also, as you can see, removed the macros to eliminate as much confusion as possible.
I still can't login in using the password 'test'.
I've also tried both the back-quote and the single-quote, no difference.
Regards,
Greg
________________________________
From: Rudolf J Streif <[email protected]><mailto:[email protected]>
Sent: Wednesday, May 15, 2019 10:07:47 AM
To: Greg Wilson-Lindberg; Yocto list discussion
Subject: Re: [yocto] problem adding a user
Hi Greg,
Well, I suppose I wrote the book you are referring to...
Using
useradd -p PASSWORD USER
takes the password hash for PASSWORD hence the use of openssl in:
useadd -p openssl passwd PASSWORD USER
openssl password creates the password hash using the original crypt hash algorithm if no other options are specified. e.g.
$ openssl passwd hello 6hEsTksgRkeiI
With this the first two characters of the output is the salt and the rest is the password hash. If you want openssl to create the same result again:
$ openssl passwd -salt "6h" hello 6hEsTksgRkeiI
You can use newer algorithms like MD5 based BSD password algorithm 1:
$ openssl passwd -1 hello $1$4Mu8Fcs.$eIKgPP7RCYrb3lFZjhADA1
$1 : password algorithm 1
$4Mu8Fcs. : salt
$eIKgPP7RCYrb3lFZjhADA1 : password hash
If you log into the system you have to use the clear password. The system reads the salt, creates the password hash and compares the results.
:rjs
Quoted 8 lines · Greg Wilson-Lindberg
I'm trying to use the example in "Embedded Linux Systems with the Yocto Project" to add a user to my Yocto build. In the book the sample code:
useradd -p `openssl passwd ${DEV_PASSWORD}` developer; \uses openssl to generate the encrypted password string to pass to useradd. I have never been able to get this to work. When I run the openssl command on the cmd line I get a different value every time, this seems wrong, How can the password code compare against it if every encode produces a different value?
Quoted 7 lines
I am getting the user added to the system, the home directory shows up and the user is in the passwd and group files. I just can't login to the account.
I've obviously got something confused, any help would be appreciated.
Greg Wilson-Lindberg
--
-----
Rudolf J Streif
CEO/CTO ibeeto
+1.855.442.3396 x700
--
-----
Rudolf J Streif
CEO/CTO ibeeto
+1.855.442.3396 x700
--
-----
Rudolf J Streif
CEO/CTO ibeeto
+1.855.442.3396 x700
Instead of
useradd -p openssl passwd test sakura
which attempts to add the user and set the password which fails if the user already exists, use
usermod -p openssl passwd test sakura
which sets the user's password.
:rjs
Quoted 180 lines · Greg Wilson-Lindberg
Ok, I had been using the useradd class in a couple of other recipes to allow me to copy files to the sakura user directory and another location, but owned by sakura. That seems to have been what was causing the problem.
I had been using the extrausers class in my top level image recipe.
So now how do I get all of this to work together? Do I need to put everything that touches the sakura user in the same recipe? It seems that I need to use only one of the useradd or extrausers classes?
Greg
------------------------------------------------------------------------
*From:* Rudolf J Streif <[email protected]> *Sent:* Wednesday, May 15, 2019 12:31 PM *To:* Greg Wilson-Lindberg; Yocto list discussion *Subject:* Re: [yocto] problem adding a userThe ! for the password in
/etc/shadowindicates that the account is disabled:sakura:!:18031:0:99999:7:::
Either there is something wrong with the password generation or it gets disabled by something else. Maybe it's worth trying with a plain image without Boot2Qt or anything else.
:rjs
Quoted 144 lines · Greg Wilson-Lindberg
Hi Rudolf,
1st, yes I inherit extrausers. Attached are the passwd & shadow files.
It shouldn't make any difference, but I'm building this for an RPi3 using the Qt Boot2Qt version of the Yocto environment, distro 2.5.3.
Greg
------------------------------------------------------------------------
*From:* Rudolf J Streif <[email protected]> *Sent:* Wednesday, May 15, 2019 11:26 AM *To:* Greg Wilson-Lindberg; Yocto list discussion *Subject:* Re: [yocto] problem adding a userHi Greg,
Quoted 1 line
I've also tried both the back-quote and the single-quote, no
difference.
Help me to understand this. the back-quotes are the right ones. If you use the single ones your password in the
/etc/shadowends up being 'openssl passwd test' (without the quotes), unless the build fails because of a parsing error (I have not tried it). Silly question, you did inherit extrausers class?Can you post your
/etc/passwdand/etc/shadowI am surprised that this does not work with your setup. I have been doing this a gazillion times always with success.
:rjs
Quoted 100 lines · Greg Wilson-Lindberg
Hi Rudolf,
Thanks for the reply, and the information on how openssl works.
I'm trying to create a user with the same group name so the code that I'm using reduces to:
EXTRA_USERS_PARAMS = "\ useradd -p `openssl passwd test` sakura; \ usermod -a -G sudo ${SAKURA_USER}; \ "I also, as you can see, removed the macros to eliminate as much confusion as possible.
I still can't login in using the password 'test'.
I've also tried both the back-quote and the single-quote, no difference.
Regards,
Greg
------------------------------------------------------------------------
*From:* Rudolf J Streif <[email protected]> *Sent:* Wednesday, May 15, 2019 10:07:47 AM *To:* Greg Wilson-Lindberg; Yocto list discussion *Subject:* Re: [yocto] problem adding a user Hi Greg,Well, I suppose I wrote the book you are referring to...
Using
useradd -p PASSWORD USER
takes the password hash for PASSWORD hence the use of openssl in:
useadd -p
openssl passwd PASSWORDUSERopenssl password creates the password hash using the original crypt hash algorithm if no other options are specified. e.g.
$ openssl passwd hello 6hEsTksgRkeiIWith this the first two characters of the output is the salt and the rest is the password hash. If you want openssl to create the same result again:
$ openssl passwd -salt "6h" hello 6hEsTksgRkeiIYou can use newer algorithms like MD5 based BSD password algorithm 1:
$ openssl passwd -1 hello $1$4Mu8Fcs.$eIKgPP7RCYrb3lFZjhADA1$1 : password algorithm 1
$4Mu8Fcs. : salt
$eIKgPP7RCYrb3lFZjhADA1 : password hashIf you log into the system you have to use the clear password. The system reads the salt, creates the password hash and compares the results.
:rjs
Quoted 1 line · Greg Wilson-Lindberg
I'm trying to use the example in "Embedded Linux Systems with the
Yocto Project" to add a user to my Yocto build. In the book the sample code:
Quoted 4 lines
useradd -p
openssl passwd ${DEV_PASSWORD}developer; \uses openssl to generate the encrypted password string to pass to
useradd. I have never been able to get this to work. When I run the openssl
Quoted 1 line
command on the cmd line I get a different value every time, this
seems wrong, How can the password code compare against it if every encode
Quoted 3 lines
produces a different value?
I am getting the user added to the system, the home directory
shows up and the user is in the passwd and group files. I just can't login to the
Quoted 6 lines
account.
I've obviously got something confused, any help would be appreciated.
Greg Wilson-Lindberg
Signature · 4 lines
----- Rudolf J Streif CEO/CTO ibeeto +1.855.442.3396 x700Signature · 4 lines
----- Rudolf J Streif CEO/CTO ibeeto +1.855.442.3396 x700Signature · 4 lines
----- Rudolf J Streif CEO/CTO ibeeto +1.855.442.3396 x700
Signature · 4 lines
----- Rudolf J Streif CEO/CTO ibeeto +1.855.442.3396 x700
Thank you very much, that got me back on the right path. Maybe I'll see you at the Yocto day at the Embedded Linux Conference. Regards,
Greg Wilson-Lindberg
Principal Firmware Engineer | Sakura Finetek USA, Inc.
1750 W 214th Street | Torrance, CA 90501 | U.S.A.
T: +1 310 783 5075
F: +1 310 618 6902 | E: [email protected]<mailto:[email protected]>
www.sakuraus.com<http://www.sakuraus.com>
[cid:[email protected]]
[cid:[email protected]]
________________________________
Confidentiality Notice: This e-mail transmission may contain confidential or legally privileged information that is intended only for the individual or entity named in the e-mail address. If you are not the intended recipient, you are hereby notified that any disclosure, copying, distribution, or reliance upon the contents of this e-mail is strictly prohibited. If you have received this e-mail transmission in error, please reply to the sender, so that Sakura Finetek USA, Inc. can arrange for proper delivery, and then please delete the message from your inbox. Thank you.
From: Rudolf J Streif [mailto:[email protected]]
Sent: Wednesday, May 15, 2019 01:30 PM
To: Greg Wilson-Lindberg <[email protected]>; Yocto list discussion <[email protected]>
Subject: Re: [yocto] problem adding a user
Instead of
useradd -p openssl passwd test sakura
which attempts to add the user and set the password which fails if the user already exists, use
usermod -p openssl passwd test sakura
which sets the user's password.
:rjs
On 5/15/19 1:18 PM, Greg Wilson-Lindberg wrote:
Ok, I had been using the useradd class in a couple of other recipes to allow me to copy files to the sakura user directory and another location, but owned by sakura. That seems to have been what was causing the problem.
I had been using the extrausers class in my top level image recipe.
So now how do I get all of this to work together? Do I need to put everything that touches the sakura user in the same recipe? It seems that I need to use only one of the useradd or extrausers classes?
Greg
________________________________
From: Rudolf J Streif <[email protected]><mailto:[email protected]>
Sent: Wednesday, May 15, 2019 12:31 PM
To: Greg Wilson-Lindberg; Yocto list discussion
Subject: Re: [yocto] problem adding a user
The ! for the password in /etc/shadow indicates that the account is disabled:
sakura:!:18031:0:99999:7:::
Either there is something wrong with the password generation or it gets disabled by something else. Maybe it's worth trying with a plain image without Boot2Qt or anything else.
:rjs
On 5/15/19 11:46 AM, Greg Wilson-Lindberg wrote:
Hi Rudolf,
1st, yes I inherit extrausers. Attached are the passwd & shadow files.
It shouldn't make any difference, but I'm building this for an RPi3 using the Qt Boot2Qt version of the Yocto environment, distro 2.5.3.
Greg
________________________________
From: Rudolf J Streif <[email protected]><mailto:[email protected]>
Sent: Wednesday, May 15, 2019 11:26 AM
To: Greg Wilson-Lindberg; Yocto list discussion
Subject: Re: [yocto] problem adding a user
Hi Greg,
Quoted 1 line
I've also tried both the back-quote and the single-quote, no difference.
Help me to understand this. the back-quotes are the right ones. If you use the single ones your password in the /etc/shadow ends up being 'openssl passwd test' (without the quotes), unless the build fails because of a parsing error (I have not tried it). Silly question, you did inherit extrausers class?
Can you post your /etc/passwd and /etc/shadow
I am surprised that this does not work with your setup. I have been doing this a gazillion times always with success.
:rjs
On 5/15/19 11:03 AM, Greg Wilson-Lindberg wrote:
Hi Rudolf,
Thanks for the reply, and the information on how openssl works.
I'm trying to create a user with the same group name so the code that I'm using reduces to:
EXTRA_USERS_PARAMS = "\
useradd -p `openssl passwd test` sakura; \
usermod -a -G sudo ${SAKURA_USER}; \
"I also, as you can see, removed the macros to eliminate as much confusion as possible.
I still can't login in using the password 'test'.
I've also tried both the back-quote and the single-quote, no difference.
Regards,
Greg
________________________________
From: Rudolf J Streif <[email protected]><mailto:[email protected]>
Sent: Wednesday, May 15, 2019 10:07:47 AM
To: Greg Wilson-Lindberg; Yocto list discussion
Subject: Re: [yocto] problem adding a user
Hi Greg,
Well, I suppose I wrote the book you are referring to...
Using
useradd -p PASSWORD USER
takes the password hash for PASSWORD hence the use of openssl in:
useadd -p openssl passwd PASSWORD USER
openssl password creates the password hash using the original crypt hash algorithm if no other options are specified. e.g.
$ openssl passwd hello 6hEsTksgRkeiI
With this the first two characters of the output is the salt and the rest is the password hash. If you want openssl to create the same result again:
$ openssl passwd -salt "6h" hello 6hEsTksgRkeiI
You can use newer algorithms like MD5 based BSD password algorithm 1:
$ openssl passwd -1 hello $1$4Mu8Fcs.$eIKgPP7RCYrb3lFZjhADA1
$1 : password algorithm 1
$4Mu8Fcs. : salt
$eIKgPP7RCYrb3lFZjhADA1 : password hash
If you log into the system you have to use the clear password. The system reads the salt, creates the password hash and compares the results.
:rjs
Quoted 8 lines · Greg Wilson-Lindberg
I'm trying to use the example in "Embedded Linux Systems with the Yocto Project" to add a user to my Yocto build. In the book the sample code:
useradd -p `openssl passwd ${DEV_PASSWORD}` developer; \uses openssl to generate the encrypted password string to pass to useradd. I have never been able to get this to work. When I run the openssl command on the cmd line I get a different value every time, this seems wrong, How can the password code compare against it if every encode produces a different value?
Quoted 7 lines
I am getting the user added to the system, the home directory shows up and the user is in the passwd and group files. I just can't login to the account.
I've obviously got something confused, any help would be appreciated.
Greg Wilson-Lindberg
--
-----
Rudolf J Streif
CEO/CTO ibeeto
+1.855.442.3396 x700
--
-----
Rudolf J Streif
CEO/CTO ibeeto
+1.855.442.3396 x700
--
-----
Rudolf J Streif
CEO/CTO ibeeto
+1.855.442.3396 x700
--
-----
Rudolf J Streif
CEO/CTO ibeeto
+1.855.442.3396 x700
Glad to hear that it works now. I am planning on attending the YP DevDay.
:rjs
Quoted 326 lines · On Wed, May 15, 2019, 13:53 Greg Wilson-Lindberg <[email protected]> wrote:
Thank you very much, that got me back on the right path.
Maybe I'll see you at the Yocto day at the Embedded Linux Conference.
Regards,
[image: cid:[email protected]]
*Greg Wilson-Lindberg *
*Principal Firmware Engineer | Sakura Finetek USA, Inc. *
1750 W 214th Street | Torrance, CA 90501 | U.S.A.
T: +1 310 783 5075
F: +1 310 618 6902 | E: [email protected]
www.sakuraus.com
[image: cid:[email protected]]
[image: cid:[email protected]]
------------------------------Confidentiality Notice: This e-mail transmission may contain confidential or legally privileged information that is intended only for the individual or entity named in the e-mail address. If you are not the intended recipient, you are hereby notified that any disclosure, copying, distribution, or reliance upon the contents of this e-mail is strictly prohibited. If you have received this e-mail transmission in error, please reply to the sender, so that Sakura Finetek USA, Inc. can arrange for proper delivery, and then please delete the message from your inbox. Thank you.
*From:* Rudolf J Streif [mailto:[email protected]] *Sent:* Wednesday, May 15, 2019 01:30 PM
*To:* Greg Wilson-Lindberg <[email protected]>; Yocto list discussion < [email protected]>
*Subject:* Re: [yocto] problem adding a userInstead of
useradd -p
openssl passwd testsakurawhich attempts to add the user and set the password which fails if the user already exists, use
usermod -p
openssl passwd testsakurawhich sets the user's password.
:rjs
On 5/15/19 1:18 PM, Greg Wilson-Lindberg wrote:
Ok, I had been using the useradd class in a couple of other recipes to allow me to copy files to the sakura user directory and another location, but owned by sakura. That seems to have been what was causing the problem.
I had been using the extrausers class in my top level image recipe.
So now how do I get all of this to work together? Do I need to put everything that touches the sakura user in the same recipe? It seems that I need to use only one of the useradd or extrausers classes?
Greg
------------------------------*From:* Rudolf J Streif <[email protected]> <[email protected]>
*Sent:* Wednesday, May 15, 2019 12:31 PM *To:* Greg Wilson-Lindberg; Yocto list discussion *Subject:* Re: [yocto] problem adding a userThe ! for the password in
/etc/shadowindicates that the account is disabled:sakura:!:18031:0:99999:7:::
Either there is something wrong with the password generation or it gets disabled by something else. Maybe it's worth trying with a plain image without Boot2Qt or anything else.
:rjs
On 5/15/19 11:46 AM, Greg Wilson-Lindberg wrote:
Hi Rudolf,
1st, yes I inherit extrausers. Attached are the passwd & shadow files.
It shouldn't make any difference, but I'm building this for an RPi3 using the Qt Boot2Qt version of the Yocto environment, distro 2.5.3.
Greg
------------------------------*From:* Rudolf J Streif <[email protected]> <[email protected]>
*Sent:* Wednesday, May 15, 2019 11:26 AM *To:* Greg Wilson-Lindberg; Yocto list discussion *Subject:* Re: [yocto] problem adding a userHi Greg,
Quoted 1 line
I've also tried both the back-quote and the single-quote, no difference.
Help me to understand this. the back-quotes are the right ones. If you use the single ones your password in the
/etc/shadowends up being 'openssl passwd test' (without the quotes), unless the build fails because of a parsing error (I have not tried it). Silly question, you did inherit extrausers class?Can you post your
/etc/passwdand/etc/shadowI am surprised that this does not work with your setup. I have been doing this a gazillion times always with success.
:rjs
On 5/15/19 11:03 AM, Greg Wilson-Lindberg wrote:
Hi Rudolf,
Thanks for the reply, and the information on how openssl works.
I'm trying to create a user with the same group name so the code that I'm using reduces to:
EXTRA_USERS_PARAMS= "\useradd -p `openssl passwd test` sakura; \ usermod -a -G sudo ${SAKURA_USER}; \ "I also, as you can see, removed the macros to eliminate as much confusion as possible.
I still can't login in using the password 'test'.
I've also tried both the back-quote and the single-quote, no difference.
Regards,
Greg
------------------------------*From:* Rudolf J Streif <[email protected]> <[email protected]>
*Sent:* Wednesday, May 15, 2019 10:07:47 AM *To:* Greg Wilson-Lindberg; Yocto list discussion *Subject:* Re: [yocto] problem adding a userHi Greg,
Well, I suppose I wrote the book you are referring to...
Using
useradd -p PASSWORD USER
takes the password hash for PASSWORD hence the use of openssl in:
useadd -p
openssl passwd PASSWORDUSERopenssl password creates the password hash using the original crypt hash algorithm if no other options are specified. e.g.
$ openssl passwd hello 6hEsTksgRkeiIWith this the first two characters of the output is the salt and the rest is the password hash. If you want openssl to create the same result again:
$ openssl passwd -salt "6h" hello 6hEsTksgRkeiIYou can use newer algorithms like MD5 based BSD password algorithm 1:
$ openssl passwd -1 hello $1$4Mu8Fcs.$eIKgPP7RCYrb3lFZjhADA1$1 : password algorithm 1
$4Mu8Fcs. : salt
$eIKgPP7RCYrb3lFZjhADA1 : password hashIf you log into the system you have to use the clear password. The system reads the salt, creates the password hash and compares the results.
:rjs
Quoted 1 line · Greg Wilson-Lindberg
I'm trying to use the example in "Embedded Linux Systems with the Yocto
Project" to add a user to my Yocto build. In the book the sample code:
Quoted 4 lines
useradd -p `openssl passwd ${DEV_PASSWORD}` developer; \uses openssl to generate the encrypted password string to pass to
useradd. I have never been able to get this to work. When I run the openssl
Quoted 1 line
command on the cmd line I get a different value every time, this seems
wrong, How can the password code compare against it if every encode
Quoted 3 lines
produces a different value?
I am getting the user added to the system, the home directory shows up
and the user is in the passwd and group files. I just can't login to the
Quoted 6 lines
account.
I've obviously got something confused, any help would be appreciated.
Greg Wilson-Lindberg
--
-----
Rudolf J Streif
CEO/CTO ibeeto
+1.855.442.3396 x700--
-----
Rudolf J Streif
CEO/CTO ibeeto
+1.855.442.3396 x700
--
-----
Rudolf J Streif
CEO/CTO ibeeto
+1.855.442.3396 x700
--
-----
Rudolf J Streif
CEO/CTO ibeeto
+1.855.442.3396 x700
Hi Rudolf,
I've had more time to work with this and I'm still having problems getting everything to work properly. I've attached the image recipe recipe that I'm using so I don't leave any thing out that may be relevant.
When I build with a password that is no more more than 8 characters long and no non-alphabetic characters:
SAKURA_PASSWD = "Distract"SAKURA_PASS = "WRsDFfg1BsrDM"
everything works correctly.
I first tried that using the openssl ... form, and then I tried the -1, MD5 BSD form and had problems, so I changed to doing the openssl on the command line and making sure that I don't have any characters that display as '.' or '/'. Again, if I don't do more than 8 characters and no special characters everything works.
When I changed to using 'Ds$tr@ct' it stopped working. The build finishes and the log file shows the usermod being exectued correctly:
NOTE: scribe: Performing usermod with [-R /home/gwilson/Qt/Qt-5.12.3/Yocto-build-RPi3/build-raspberrypi3/tmp/work/raspberrypi3-poky-linux-gnueabi/scribe/1.0-r0/rootfs -p kyNsrvS0elMWU sakura]
NOTE: scribe: Performing usermod with [-R /home/gwilson/Qt/Qt-5.12.3/Yocto-build-RPi3/build-raspberrypi3/tmp/work/raspberrypi3-poky-linux-gnueabi/scribe/1.0-r0/rootfs -a -G sudo,dialout sakura]
But when I try to sign in it doesn't work.
I then tried the 10 character password 'Distracted', the build fails:
NOTE: scribe: Performing usermod with [-R /home/gwilson/Qt/Qt-5.12.3/Yocto-build-RPi3/build-raspberrypi3/tmp/work/raspberrypi3-poky-linux-gnueabi/scribe/1.0-r0/rootfs -p sakura]
Usage: usermod [options] LOGIN
Options:
-c, --comment COMMENT new value of the GECOS field
-d, --home HOME_DIR new home directory for the user account
-e, --expiredate EXPIRE_DATE set account expiration date to EXPIRE_DATE
-f, --inactive INACTIVE set password inactive after expiration
to INACTIVE
-g, --gid GROUP force use GROUP as new primary group
-G, --groups GROUPS new list of supplementary GROUPS
-a, --append append the user to the supplemental GROUPS
mentioned by the -G option without removing
him/her from other groups
-h, --help display this help message and exit
-l, --login NEW_LOGIN new value of the login name
-L, --lock lock the user account
-m, --move-home move contents of the home directory to the
new location (use only with -d)
-o, --non-unique allow using duplicate (non-unique) UID
-p, --password PASSWORD use encrypted password for the new password
-P, --clear-password PASSWORD use clear password for the new password
-R, --root CHROOT_DIR directory to chroot into
-s, --shell SHELL new login shell for the user account
-u, --uid UID new UID for the user account
-U, --unlock unlock the user account
-v, --add-subuids FIRST-LAST add range of subordinate uids
-V, --del-subuids FIRST-LAST remove range of subordinate uids
-w, --add-subgids FIRST-LAST add range of subordinate gids
-W, --del-subgids FIRST-LAST remove range of subordinate gidsERROR: scribe: usermod command did not succeed.
So, even though I'm putting in the openssl output:
openssl passwd -1 "Distracted" $1$QVO3K6Ii$fvkoDKnlzz3d5uVoL7KcM0
that I get back from what should be a valid run of openssl, I don't see anything from the password on the usermod command line:
"...linux-gnueabi/scribe/1.0-r0/rootfs -p sakura]"
I don't understand why the short passwords and passing along the proper hash works, but not the longer password.
It also doesn't make sense that I can't put in the '$' & '@' characters and have them work.
Any suggestions would be greatly appreciated.
Greg
________________________________
From: Rudolf Streif <[email protected]>
Sent: Wednesday, May 15, 2019 4:58:26 PM
To: Greg Wilson-Lindberg
Cc: Yocto list discussion
Subject: Re: [yocto] problem adding a user
Glad to hear that it works now. I am planning on attending the YP DevDay.
:rjs
On Wed, May 15, 2019, 13:53 Greg Wilson-Lindberg <[email protected]<mailto:[email protected]>> wrote:
Thank you very much, that got me back on the right path.
Maybe I'll see you at the Yocto day at the Embedded Linux Conference.
Regards,
Greg Wilson-Lindberg
Principal Firmware Engineer | Sakura Finetek USA, Inc.
1750 W 214th Street | Torrance, CA 90501 | U.S.A.
T: +1 310 783 5075
F: +1 310 618 6902 | E: [email protected]<mailto:[email protected]>
www.sakuraus.com<http://www.sakuraus.com>
[cid:[email protected]]
[cid:[email protected]]
________________________________
Confidentiality Notice: This e-mail transmission may contain confidential or legally privileged information that is intended only for the individual or entity named in the e-mail address. If you are not the intended recipient, you are hereby notified that any disclosure, copying, distribution, or reliance upon the contents of this e-mail is strictly prohibited. If you have received this e-mail transmission in error, please reply to the sender, so that Sakura Finetek USA, Inc. can arrange for proper delivery, and then please delete the message from your inbox. Thank you.
From: Rudolf J Streif [mailto:[email protected]<mailto:[email protected]>]
Sent: Wednesday, May 15, 2019 01:30 PM
To: Greg Wilson-Lindberg <[email protected]<mailto:[email protected]>>; Yocto list discussion <[email protected]<mailto:[email protected]>>
Subject: Re: [yocto] problem adding a user
Instead of
useradd -p openssl passwd test sakura
which attempts to add the user and set the password which fails if the user already exists, use
usermod -p openssl passwd test sakura
which sets the user's password.
:rjs
On 5/15/19 1:18 PM, Greg Wilson-Lindberg wrote:
Ok, I had been using the useradd class in a couple of other recipes to allow me to copy files to the sakura user directory and another location, but owned by sakura. That seems to have been what was causing the problem.
I had been using the extrausers class in my top level image recipe.
So now how do I get all of this to work together? Do I need to put everything that touches the sakura user in the same recipe? It seems that I need to use only one of the useradd or extrausers classes?
Greg
________________________________
From: Rudolf J Streif <[email protected]><mailto:[email protected]>
Sent: Wednesday, May 15, 2019 12:31 PM
To: Greg Wilson-Lindberg; Yocto list discussion
Subject: Re: [yocto] problem adding a user
The ! for the password in /etc/shadow indicates that the account is disabled:
sakura:!:18031:0:99999:7:::
Either there is something wrong with the password generation or it gets disabled by something else. Maybe it's worth trying with a plain image without Boot2Qt or anything else.
:rjs
On 5/15/19 11:46 AM, Greg Wilson-Lindberg wrote:
Hi Rudolf,
1st, yes I inherit extrausers. Attached are the passwd & shadow files.
It shouldn't make any difference, but I'm building this for an RPi3 using the Qt Boot2Qt version of the Yocto environment, distro 2.5.3.
Greg
________________________________
From: Rudolf J Streif <[email protected]><mailto:[email protected]>
Sent: Wednesday, May 15, 2019 11:26 AM
To: Greg Wilson-Lindberg; Yocto list discussion
Subject: Re: [yocto] problem adding a user
Hi Greg,
Quoted 1 line
I've also tried both the back-quote and the single-quote, no difference.
Help me to understand this. the back-quotes are the right ones. If you use the single ones your password in the /etc/shadow ends up being 'openssl passwd test' (without the quotes), unless the build fails because of a parsing error (I have not tried it). Silly question, you did inherit extrausers class?
Can you post your /etc/passwd and /etc/shadow
I am surprised that this does not work with your setup. I have been doing this a gazillion times always with success.
:rjs
On 5/15/19 11:03 AM, Greg Wilson-Lindberg wrote:
Hi Rudolf,
Thanks for the reply, and the information on how openssl works.
I'm trying to create a user with the same group name so the code that I'm using reduces to:
EXTRA_USERS_PARAMS = "\
useradd -p `openssl passwd test` sakura; \
usermod -a -G sudo ${SAKURA_USER}; \
"I also, as you can see, removed the macros to eliminate as much confusion as possible.
I still can't login in using the password 'test'.
I've also tried both the back-quote and the single-quote, no difference.
Regards,
Greg
________________________________
From: Rudolf J Streif <[email protected]><mailto:[email protected]>
Sent: Wednesday, May 15, 2019 10:07:47 AM
To: Greg Wilson-Lindberg; Yocto list discussion
Subject: Re: [yocto] problem adding a user
Hi Greg,
Well, I suppose I wrote the book you are referring to...
Using
useradd -p PASSWORD USER
takes the password hash for PASSWORD hence the use of openssl in:
useadd -p openssl passwd PASSWORD USER
openssl password creates the password hash using the original crypt hash algorithm if no other options are specified. e.g.
$ openssl passwd hello 6hEsTksgRkeiI
With this the first two characters of the output is the salt and the rest is the password hash. If you want openssl to create the same result again:
$ openssl passwd -salt "6h" hello 6hEsTksgRkeiI
You can use newer algorithms like MD5 based BSD password algorithm 1:
$ openssl passwd -1 hello $1$4Mu8Fcs.$eIKgPP7RCYrb3lFZjhADA1
$1 : password algorithm 1
$4Mu8Fcs. : salt
$eIKgPP7RCYrb3lFZjhADA1 : password hash
If you log into the system you have to use the clear password. The system reads the salt, creates the password hash and compares the results.
:rjs
Quoted 8 lines · Greg Wilson-Lindberg
I'm trying to use the example in "Embedded Linux Systems with the Yocto Project" to add a user to my Yocto build. In the book the sample code:
useradd -p `openssl passwd ${DEV_PASSWORD}` developer; \uses openssl to generate the encrypted password string to pass to useradd. I have never been able to get this to work. When I run the openssl command on the cmd line I get a different value every time, this seems wrong, How can the password code compare against it if every encode produces a different value?
Quoted 7 lines
I am getting the user added to the system, the home directory shows up and the user is in the passwd and group files. I just can't login to the account.
I've obviously got something confused, any help would be appreciated.
Greg Wilson-Lindberg
--
-----
Rudolf J Streif
CEO/CTO ibeeto
+1.855.442.3396 x700
--
-----
Rudolf J Streif
CEO/CTO ibeeto
+1.855.442.3396 x700
--
-----
Rudolf J Streif
CEO/CTO ibeeto
+1.855.442.3396 x700
--
-----
Rudolf J Streif
CEO/CTO ibeeto
+1.855.442.3396 x700
Greg,
usermod does not work for the MD5 algorithm with the explicit password hash as it contains the $ field delimiters which are interpreted by the shell executing the usermod command. Use single quotes around the password hash:
usermod -p '${SAKURA_PASS}' ${SAKURA_USER};
:rjs
Quoted 421 lines · On Mon, May 20, 2019, 11:55 Greg Wilson-Lindberg <[email protected]> wrote:
Hi Rudolf,
I've had more time to work with this and I'm still having problems getting everything to work properly. I've attached the image recipe recipe that I'm using so I don't leave any thing out that may be relevant.
When I build with a password that is no more more than 8 characters long and no non-alphabetic characters:
SAKURA_PASSWD= "Distract"SAKURA_PASS= "WRsDFfg1BsrDM"everything works correctly.
I first tried that using the
openssl ...form, and then I tried the -1, MD5 BSD form and had problems, so I changed to doing the openssl on the command line and making sure that I don't have any characters that display as '.' or '/'. Again, if I don't do more than 8 characters and no special characters everything works.When I changed to using 'Ds$tr@ct' it stopped working. The build finishes and the log file shows the usermod being exectued correctly:
NOTE: scribe: Performing usermod with [-R
/home/gwilson/Qt/Qt-5.12.3/Yocto-build-RPi3/build-raspberrypi3/tmp/work/raspberrypi3-poky-linux-gnueabi/scribe/1.0-r0/rootfs-p kyNsrvS0elMWU sakura]
NOTE: scribe: Performing usermod with [-R/home/gwilson/Qt/Qt-5.12.3/Yocto-build-RPi3/build-raspberrypi3/tmp/work/raspberrypi3-poky-linux-gnueabi/scribe/1.0-r0/rootfs-a -G sudo,dialout sakura]But when I try to sign in it doesn't work.
I then tried the 10 character password 'Distracted', the build fails:
NOTE: scribe: Performing usermod with [-R
/home/gwilson/Qt/Qt-5.12.3/Yocto-build-RPi3/build-raspberrypi3/tmp/work/raspberrypi3-poky-linux-gnueabi/scribe/1.0-r0/rootfs-p sakura]
Usage: usermod [options] LOGINOptions:
-c, --comment COMMENT new value of the GECOS field -d, --home HOME_DIR new home directory for the user account -e, --expiredate EXPIRE_DATE set account expiration date to EXPIRE_DATE -f, --inactive INACTIVE set password inactive after expiration to INACTIVE -g, --gid GROUP force use GROUP as new primary group -G, --groups GROUPS new list of supplementary GROUPS -a, --append append the user to the supplemental GROUPS mentioned by the -G option without removing him/her from other groups -h, --help display this help message and exit -l, --login NEW_LOGIN new value of the login name -L, --lock lock the user account -m, --move-home move contents of the home directory to the new location (use only with -d) -o, --non-unique allow using duplicate (non-unique) UID -p, --password PASSWORD use encrypted password for the new password -P, --clear-password PASSWORD use clear password for the new password -R, --root CHROOT_DIR directory to chroot into -s, --shell SHELL new login shell for the user account -u, --uid UID new UID for the user account -U, --unlock unlock the user account -v, --add-subuids FIRST-LAST add range of subordinate uids -V, --del-subuids FIRST-LAST remove range of subordinate uids -w, --add-subgids FIRST-LAST add range of subordinate gids -W, --del-subgids FIRST-LAST remove range of subordinate gidsERROR: scribe: usermod command did not succeed.
So, even though I'm putting in the openssl output:
openssl passwd -1 "Distracted" $1$QVO3K6Ii$fvkoDKnlzz3d5uVoL7KcM0that I get back from what should be a valid run of openssl, I don't see anything from the password on the usermod command line:
"...linux-gnueabi/scribe/1.0-r0/rootfs -p sakura]"I don't understand why the short passwords and passing along the proper hash works, but not the longer password.
It also doesn't make sense that I can't put in the '$' & '@' characters and have them work.
Any suggestions would be greatly appreciated.
Greg
------------------------------
*From:* Rudolf Streif <[email protected]>
*Sent:* Wednesday, May 15, 2019 4:58:26 PM
*To:* Greg Wilson-Lindberg
*Cc:* Yocto list discussion
*Subject:* Re: [yocto] problem adding a userGlad to hear that it works now. I am planning on attending the YP DevDay.
:rjs
Quoted 326 lines · On Wed, May 15, 2019, 13:53 Greg Wilson-Lindberg <[email protected]> wrote:
Thank you very much, that got me back on the right path.
Maybe I'll see you at the Yocto day at the Embedded Linux Conference.
Regards,
[image: cid:[email protected]]
*Greg Wilson-Lindberg *
*Principal Firmware Engineer | Sakura Finetek USA, Inc. *
1750 W 214th Street | Torrance, CA 90501 | U.S.A.
T: +1 310 783 5075
F: +1 310 618 6902 | E: [email protected]
www.sakuraus.com
[image: cid:[email protected]]
[image: cid:[email protected]]
------------------------------Confidentiality Notice: This e-mail transmission may contain confidential or legally privileged information that is intended only for the individual or entity named in the e-mail address. If you are not the intended recipient, you are hereby notified that any disclosure, copying, distribution, or reliance upon the contents of this e-mail is strictly prohibited. If you have received this e-mail transmission in error, please reply to the sender, so that Sakura Finetek USA, Inc. can arrange for proper delivery, and then please delete the message from your inbox. Thank you.
*From:* Rudolf J Streif [mailto:[email protected]] *Sent:* Wednesday, May 15, 2019 01:30 PM
*To:* Greg Wilson-Lindberg <[email protected]>; Yocto list discussion <[email protected]>
*Subject:* Re: [yocto] problem adding a userInstead of
useradd -p
openssl passwd testsakurawhich attempts to add the user and set the password which fails if the user already exists, use
usermod -p
openssl passwd testsakurawhich sets the user's password.
:rjs
On 5/15/19 1:18 PM, Greg Wilson-Lindberg wrote:
Ok, I had been using the useradd class in a couple of other recipes to allow me to copy files to the sakura user directory and another location, but owned by sakura. That seems to have been what was causing the problem.
I had been using the extrausers class in my top level image recipe.
So now how do I get all of this to work together? Do I need to put everything that touches the sakura user in the same recipe? It seems that I need to use only one of the useradd or extrausers classes?
Greg
------------------------------*From:* Rudolf J Streif <[email protected]> <[email protected]>
*Sent:* Wednesday, May 15, 2019 12:31 PM *To:* Greg Wilson-Lindberg; Yocto list discussion *Subject:* Re: [yocto] problem adding a userThe ! for the password in
/etc/shadowindicates that the account is disabled:sakura:!:18031:0:99999:7:::
Either there is something wrong with the password generation or it gets disabled by something else. Maybe it's worth trying with a plain image without Boot2Qt or anything else.
:rjs
On 5/15/19 11:46 AM, Greg Wilson-Lindberg wrote:
Hi Rudolf,
1st, yes I inherit extrausers. Attached are the passwd & shadow files.
It shouldn't make any difference, but I'm building this for an RPi3 using the Qt Boot2Qt version of the Yocto environment, distro 2.5.3.
Greg
------------------------------*From:* Rudolf J Streif <[email protected]> <[email protected]>
*Sent:* Wednesday, May 15, 2019 11:26 AM *To:* Greg Wilson-Lindberg; Yocto list discussion *Subject:* Re: [yocto] problem adding a userHi Greg,
Quoted 1 line
I've also tried both the back-quote and the single-quote, no difference.
Help me to understand this. the back-quotes are the right ones. If you use the single ones your password in the
/etc/shadowends up being 'openssl passwd test' (without the quotes), unless the build fails because of a parsing error (I have not tried it). Silly question, you did inherit extrausers class?Can you post your
/etc/passwdand/etc/shadowI am surprised that this does not work with your setup. I have been doing this a gazillion times always with success.
:rjs
On 5/15/19 11:03 AM, Greg Wilson-Lindberg wrote:
Hi Rudolf,
Thanks for the reply, and the information on how openssl works.
I'm trying to create a user with the same group name so the code that I'm using reduces to:
EXTRA_USERS_PARAMS= "\useradd -p `openssl passwd test` sakura; \ usermod -a -G sudo ${SAKURA_USER}; \ "I also, as you can see, removed the macros to eliminate as much confusion as possible.
I still can't login in using the password 'test'.
I've also tried both the back-quote and the single-quote, no difference.
Regards,
Greg
------------------------------*From:* Rudolf J Streif <[email protected]> <[email protected]>
*Sent:* Wednesday, May 15, 2019 10:07:47 AM *To:* Greg Wilson-Lindberg; Yocto list discussion *Subject:* Re: [yocto] problem adding a userHi Greg,
Well, I suppose I wrote the book you are referring to...
Using
useradd -p PASSWORD USER
takes the password hash for PASSWORD hence the use of openssl in:
useadd -p
openssl passwd PASSWORDUSERopenssl password creates the password hash using the original crypt hash algorithm if no other options are specified. e.g.
$ openssl passwd hello 6hEsTksgRkeiIWith this the first two characters of the output is the salt and the rest is the password hash. If you want openssl to create the same result again:
$ openssl passwd -salt "6h" hello 6hEsTksgRkeiIYou can use newer algorithms like MD5 based BSD password algorithm 1:
$ openssl passwd -1 hello $1$4Mu8Fcs.$eIKgPP7RCYrb3lFZjhADA1$1 : password algorithm 1
$4Mu8Fcs. : salt
$eIKgPP7RCYrb3lFZjhADA1 : password hashIf you log into the system you have to use the clear password. The system reads the salt, creates the password hash and compares the results.
:rjs
Quoted 1 line · Greg Wilson-Lindberg
I'm trying to use the example in "Embedded Linux Systems with the Yocto
Project" to add a user to my Yocto build. In the book the sample code:
Quoted 4 lines
useradd -p `openssl passwd ${DEV_PASSWORD}` developer; \uses openssl to generate the encrypted password string to pass to
useradd. I have never been able to get this to work. When I run the openssl
Quoted 1 line
command on the cmd line I get a different value every time, this seems
wrong, How can the password code compare against it if every encode
Quoted 3 lines
produces a different value?
I am getting the user added to the system, the home directory shows up
and the user is in the passwd and group files. I just can't login to the
Quoted 6 lines
account.
I've obviously got something confused, any help would be appreciated.
Greg Wilson-Lindberg
--
-----
Rudolf J Streif
CEO/CTO ibeeto
+1.855.442.3396 x700--
-----
Rudolf J Streif
CEO/CTO ibeeto
+1.855.442.3396 x700
--
-----
Rudolf J Streif
CEO/CTO ibeeto
+1.855.442.3396 x700
--
-----
Rudolf J Streif
CEO/CTO ibeeto
+1.855.442.3396 x700
Rudolf,
Something else is happening to me. I changed to this in the image recipe:
SAKURA_USER = "sakura"
SAKURA_PASSWD = "Distracted"SAKURA_PASS = "$1$QVO3K6Ii$fvkoDKnlzz3d5uVoL7KcM0"
EXTRA_USERS_PARAMS = "\
usermod -p '${SAKURA_PASS}' ${SAKURA_USER}; \
usermod -a -G sudo,dialout ${SAKURA_USER}; \
"deleting all of the commented out lines, and I get this in the log file:
..../scribe/1.0-r0/rootfs -p '' sakura]
nothing between the single quotes. It's acting like SAKURA_PASS is not defined.
This is only happening when I'm trying the MD5 password.
Greg
________________________________
From: Rudolf Streif <[email protected]>
Sent: Tuesday, May 21, 2019 5:37:23 AM
To: Greg Wilson-Lindberg
Cc: Yocto list discussion
Subject: Re: [yocto] problem adding a user
Greg,
usermod does not work for the MD5 algorithm with the explicit password hash as it contains the $ field delimiters which are interpreted by the shell executing the usermod command. Use single quotes around the password hash:
usermod -p '${SAKURA_PASS}' ${SAKURA_USER};
:rjs
On Mon, May 20, 2019, 11:55 Greg Wilson-Lindberg <[email protected]<mailto:[email protected]>> wrote:
Hi Rudolf,
I've had more time to work with this and I'm still having problems getting everything to work properly. I've attached the image recipe recipe that I'm using so I don't leave any thing out that may be relevant.
When I build with a password that is no more more than 8 characters long and no non-alphabetic characters:
SAKURA_PASSWD = "Distract"SAKURA_PASS = "WRsDFfg1BsrDM"
everything works correctly.
I first tried that using the openssl ... form, and then I tried the -1, MD5 BSD form and had problems, so I changed to doing the openssl on the command line and making sure that I don't have any characters that display as '.' or '/'. Again, if I don't do more than 8 characters and no special characters everything works.
When I changed to using 'Ds$tr@ct' it stopped working. The build finishes and the log file shows the usermod being exectued correctly:
NOTE: scribe: Performing usermod with [-R /home/gwilson/Qt/Qt-5.12.3/Yocto-build-RPi3/build-raspberrypi3/tmp/work/raspberrypi3-poky-linux-gnueabi/scribe/1.0-r0/rootfs -p kyNsrvS0elMWU sakura]
NOTE: scribe: Performing usermod with [-R /home/gwilson/Qt/Qt-5.12.3/Yocto-build-RPi3/build-raspberrypi3/tmp/work/raspberrypi3-poky-linux-gnueabi/scribe/1.0-r0/rootfs -a -G sudo,dialout sakura]
But when I try to sign in it doesn't work.
I then tried the 10 character password 'Distracted', the build fails:
NOTE: scribe: Performing usermod with [-R /home/gwilson/Qt/Qt-5.12.3/Yocto-build-RPi3/build-raspberrypi3/tmp/work/raspberrypi3-poky-linux-gnueabi/scribe/1.0-r0/rootfs -p sakura]
Usage: usermod [options] LOGIN
Options:
-c, --comment COMMENT new value of the GECOS field
-d, --home HOME_DIR new home directory for the user account
-e, --expiredate EXPIRE_DATE set account expiration date to EXPIRE_DATE
-f, --inactive INACTIVE set password inactive after expiration
to INACTIVE
-g, --gid GROUP force use GROUP as new primary group
-G, --groups GROUPS new list of supplementary GROUPS
-a, --append append the user to the supplemental GROUPS
mentioned by the -G option without removing
him/her from other groups
-h, --help display this help message and exit
-l, --login NEW_LOGIN new value of the login name
-L, --lock lock the user account
-m, --move-home move contents of the home directory to the
new location (use only with -d)
-o, --non-unique allow using duplicate (non-unique) UID
-p, --password PASSWORD use encrypted password for the new password
-P, --clear-password PASSWORD use clear password for the new password
-R, --root CHROOT_DIR directory to chroot into
-s, --shell SHELL new login shell for the user account
-u, --uid UID new UID for the user account
-U, --unlock unlock the user account
-v, --add-subuids FIRST-LAST add range of subordinate uids
-V, --del-subuids FIRST-LAST remove range of subordinate uids
-w, --add-subgids FIRST-LAST add range of subordinate gids
-W, --del-subgids FIRST-LAST remove range of subordinate gidsERROR: scribe: usermod command did not succeed.
So, even though I'm putting in the openssl output:
openssl passwd -1 "Distracted" $1$QVO3K6Ii$fvkoDKnlzz3d5uVoL7KcM0
that I get back from what should be a valid run of openssl, I don't see anything from the password on the usermod command line:
"...linux-gnueabi/scribe/1.0-r0/rootfs -p sakura]"
I don't understand why the short passwords and passing along the proper hash works, but not the longer password.
It also doesn't make sense that I can't put in the '$' & '@' characters and have them work.
Any suggestions would be greatly appreciated.
Greg
________________________________
From: Rudolf Streif <[email protected]<mailto:[email protected]>>
Sent: Wednesday, May 15, 2019 4:58:26 PM
To: Greg Wilson-Lindberg
Cc: Yocto list discussion
Subject: Re: [yocto] problem adding a user
Glad to hear that it works now. I am planning on attending the YP DevDay.
:rjs
On Wed, May 15, 2019, 13:53 Greg Wilson-Lindberg <[email protected]<mailto:[email protected]>> wrote:
Thank you very much, that got me back on the right path.
Maybe I'll see you at the Yocto day at the Embedded Linux Conference.
Regards,
Greg Wilson-Lindberg
Principal Firmware Engineer | Sakura Finetek USA, Inc.
1750 W 214th Street | Torrance, CA 90501 | U.S.A.
T: +1 310 783 5075
F: +1 310 618 6902 | E: [email protected]<mailto:[email protected]>
www.sakuraus.com<http://www.sakuraus.com>
[cid:[email protected]]
[cid:[email protected]]
________________________________
Confidentiality Notice: This e-mail transmission may contain confidential or legally privileged information that is intended only for the individual or entity named in the e-mail address. If you are not the intended recipient, you are hereby notified that any disclosure, copying, distribution, or reliance upon the contents of this e-mail is strictly prohibited. If you have received this e-mail transmission in error, please reply to the sender, so that Sakura Finetek USA, Inc. can arrange for proper delivery, and then please delete the message from your inbox. Thank you.
From: Rudolf J Streif [mailto:[email protected]<mailto:[email protected]>]
Sent: Wednesday, May 15, 2019 01:30 PM
To: Greg Wilson-Lindberg <[email protected]<mailto:[email protected]>>; Yocto list discussion <[email protected]<mailto:[email protected]>>
Subject: Re: [yocto] problem adding a user
Instead of
useradd -p openssl passwd test sakura
which attempts to add the user and set the password which fails if the user already exists, use
usermod -p openssl passwd test sakura
which sets the user's password.
:rjs
On 5/15/19 1:18 PM, Greg Wilson-Lindberg wrote:
Ok, I had been using the useradd class in a couple of other recipes to allow me to copy files to the sakura user directory and another location, but owned by sakura. That seems to have been what was causing the problem.
I had been using the extrausers class in my top level image recipe.
So now how do I get all of this to work together? Do I need to put everything that touches the sakura user in the same recipe? It seems that I need to use only one of the useradd or extrausers classes?
Greg
________________________________
From: Rudolf J Streif <[email protected]><mailto:[email protected]>
Sent: Wednesday, May 15, 2019 12:31 PM
To: Greg Wilson-Lindberg; Yocto list discussion
Subject: Re: [yocto] problem adding a user
The ! for the password in /etc/shadow indicates that the account is disabled:
sakura:!:18031:0:99999:7:::
Either there is something wrong with the password generation or it gets disabled by something else. Maybe it's worth trying with a plain image without Boot2Qt or anything else.
:rjs
On 5/15/19 11:46 AM, Greg Wilson-Lindberg wrote:
Hi Rudolf,
1st, yes I inherit extrausers. Attached are the passwd & shadow files.
It shouldn't make any difference, but I'm building this for an RPi3 using the Qt Boot2Qt version of the Yocto environment, distro 2.5.3.
Greg
________________________________
From: Rudolf J Streif <[email protected]><mailto:[email protected]>
Sent: Wednesday, May 15, 2019 11:26 AM
To: Greg Wilson-Lindberg; Yocto list discussion
Subject: Re: [yocto] problem adding a user
Hi Greg,
Quoted 1 line
I've also tried both the back-quote and the single-quote, no difference.
Help me to understand this. the back-quotes are the right ones. If you use the single ones your password in the /etc/shadow ends up being 'openssl passwd test' (without the quotes), unless the build fails because of a parsing error (I have not tried it). Silly question, you did inherit extrausers class?
Can you post your /etc/passwd and /etc/shadow
I am surprised that this does not work with your setup. I have been doing this a gazillion times always with success.
:rjs
On 5/15/19 11:03 AM, Greg Wilson-Lindberg wrote:
Hi Rudolf,
Thanks for the reply, and the information on how openssl works.
I'm trying to create a user with the same group name so the code that I'm using reduces to:
EXTRA_USERS_PARAMS = "\
useradd -p `openssl passwd test` sakura; \
usermod -a -G sudo ${SAKURA_USER}; \
"I also, as you can see, removed the macros to eliminate as much confusion as possible.
I still can't login in using the password 'test'.
I've also tried both the back-quote and the single-quote, no difference.
Regards,
Greg
________________________________
From: Rudolf J Streif <[email protected]><mailto:[email protected]>
Sent: Wednesday, May 15, 2019 10:07:47 AM
To: Greg Wilson-Lindberg; Yocto list discussion
Subject: Re: [yocto] problem adding a user
Hi Greg,
Well, I suppose I wrote the book you are referring to...
Using
useradd -p PASSWORD USER
takes the password hash for PASSWORD hence the use of openssl in:
useadd -p openssl passwd PASSWORD USER
openssl password creates the password hash using the original crypt hash algorithm if no other options are specified. e.g.
$ openssl passwd hello 6hEsTksgRkeiI
With this the first two characters of the output is the salt and the rest is the password hash. If you want openssl to create the same result again:
$ openssl passwd -salt "6h" hello 6hEsTksgRkeiI
You can use newer algorithms like MD5 based BSD password algorithm 1:
$ openssl passwd -1 hello $1$4Mu8Fcs.$eIKgPP7RCYrb3lFZjhADA1
$1 : password algorithm 1
$4Mu8Fcs. : salt
$eIKgPP7RCYrb3lFZjhADA1 : password hash
If you log into the system you have to use the clear password. The system reads the salt, creates the password hash and compares the results.
:rjs
Quoted 8 lines · Greg Wilson-Lindberg
I'm trying to use the example in "Embedded Linux Systems with the Yocto Project" to add a user to my Yocto build. In the book the sample code:
useradd -p `openssl passwd ${DEV_PASSWORD}` developer; \uses openssl to generate the encrypted password string to pass to useradd. I have never been able to get this to work. When I run the openssl command on the cmd line I get a different value every time, this seems wrong, How can the password code compare against it if every encode produces a different value?
Quoted 7 lines
I am getting the user added to the system, the home directory shows up and the user is in the passwd and group files. I just can't login to the account.
I've obviously got something confused, any help would be appreciated.
Greg Wilson-Lindberg
--
-----
Rudolf J Streif
CEO/CTO ibeeto
+1.855.442.3396 x700
--
-----
Rudolf J Streif
CEO/CTO ibeeto
+1.855.442.3396 x700
--
-----
Rudolf J Streif
CEO/CTO ibeeto
+1.855.442.3396 x700
--
-----
Rudolf J Streif
CEO/CTO ibeeto
+1.855.442.3396 x700
Greg,
Can you share the logfile via Pastebin?
:rjs
Quoted 471 lines · Greg Wilson-Lindberg
Rudolf,
Something else is happening to me. I changed to this in the image recipe:
SAKURA_USER= "sakura"
SAKURA_PASSWD= "Distracted"SAKURA_PASS= "$1$QVO3K6Ii$fvkoDKnlzz3d5uVoL7KcM0"EXTRA_USERS_PARAMS = "\ usermod -p '${SAKURA_PASS}' ${SAKURA_USER}; \ usermod -a -G sudo,dialout ${SAKURA_USER}; \ "deleting all of the commented out lines, and I get this in the log file:
..../scribe/1.0-r0/rootfs -p '' sakura]
nothing between the single quotes. It's acting like
SAKURA_PASSis not defined.This is only happening when I'm trying the MD5 password.
Greg
------------------------------
*From:* Rudolf Streif <[email protected]>
*Sent:* Tuesday, May 21, 2019 5:37:23 AM
*To:* Greg Wilson-Lindberg
*Cc:* Yocto list discussion
*Subject:* Re: [yocto] problem adding a userGreg,
usermod does not work for the MD5 algorithm with the explicit password hash as it contains the $ field delimiters which are interpreted by the shell executing the usermod command. Use single quotes around the password hash:
usermod -p '${SAKURA_PASS}' ${SAKURA_USER};
:rjs
Quoted 423 lines · On Mon, May 20, 2019, 11:55 Greg Wilson-Lindberg <[email protected]> wrote:
Hi Rudolf,
I've had more time to work with this and I'm still having problems getting everything to work properly. I've attached the image recipe recipe that I'm using so I don't leave any thing out that may be relevant.
When I build with a password that is no more more than 8 characters long and no non-alphabetic characters:
SAKURA_PASSWD= "Distract"SAKURA_PASS= "WRsDFfg1BsrDM"everything works correctly.
I first tried that using the
openssl ...form, and then I tried the -1, MD5 BSD form and had problems, so I changed to doing the openssl on the command line and making sure that I don't have any characters that display as '.' or '/'. Again, if I don't do more than 8 characters and no special characters everything works.When I changed to using 'Ds$tr@ct' it stopped working. The build finishes and the log file shows the usermod being exectued correctly:
NOTE: scribe: Performing usermod with [-R
/home/gwilson/Qt/Qt-5.12.3/Yocto-build-RPi3/build-raspberrypi3/tmp/work/raspberrypi3-poky-linux-gnueabi/scribe/1.0-r0/rootfs-p kyNsrvS0elMWU sakura]
NOTE: scribe: Performing usermod with [-R/home/gwilson/Qt/Qt-5.12.3/Yocto-build-RPi3/build-raspberrypi3/tmp/work/raspberrypi3-poky-linux-gnueabi/scribe/1.0-r0/rootfs-a -G sudo,dialout sakura]But when I try to sign in it doesn't work.
I then tried the 10 character password 'Distracted', the build fails:
NOTE: scribe: Performing usermod with [-R
/home/gwilson/Qt/Qt-5.12.3/Yocto-build-RPi3/build-raspberrypi3/tmp/work/raspberrypi3-poky-linux-gnueabi/scribe/1.0-r0/rootfs-p sakura]
Usage: usermod [options] LOGINOptions:
-c, --comment COMMENT new value of the GECOS field -d, --home HOME_DIR new home directory for the user account -e, --expiredate EXPIRE_DATE set account expiration date to EXPIRE_DATE -f, --inactive INACTIVE set password inactive after expiration to INACTIVE -g, --gid GROUP force use GROUP as new primary group -G, --groups GROUPS new list of supplementary GROUPS -a, --append append the user to the supplemental GROUPS mentioned by the -G option without removing him/her from other groups -h, --help display this help message and exit -l, --login NEW_LOGIN new value of the login name -L, --lock lock the user account -m, --move-home move contents of the home directory to the new location (use only with -d) -o, --non-unique allow using duplicate (non-unique) UID -p, --password PASSWORD use encrypted password for the new password -P, --clear-password PASSWORD use clear password for the new password -R, --root CHROOT_DIR directory to chroot into -s, --shell SHELL new login shell for the user account -u, --uid UID new UID for the user account -U, --unlock unlock the user account -v, --add-subuids FIRST-LAST add range of subordinate uids -V, --del-subuids FIRST-LAST remove range of subordinate uids -w, --add-subgids FIRST-LAST add range of subordinate gids -W, --del-subgids FIRST-LAST remove range of subordinate gidsERROR: scribe: usermod command did not succeed.
So, even though I'm putting in the openssl output:
openssl passwd -1 "Distracted" $1$QVO3K6Ii$fvkoDKnlzz3d5uVoL7KcM0that I get back from what should be a valid run of openssl, I don't see anything from the password on the usermod command line:
"...linux-gnueabi/scribe/1.0-r0/rootfs -p sakura]"I don't understand why the short passwords and passing along the proper hash works, but not the longer password.
It also doesn't make sense that I can't put in the '$' & '@' characters and have them work.
Any suggestions would be greatly appreciated.
Greg
------------------------------
*From:* Rudolf Streif <[email protected]>
*Sent:* Wednesday, May 15, 2019 4:58:26 PM
*To:* Greg Wilson-Lindberg
*Cc:* Yocto list discussion
*Subject:* Re: [yocto] problem adding a userGlad to hear that it works now. I am planning on attending the YP DevDay.
:rjs
Quoted 328 lines · On Wed, May 15, 2019, 13:53 Greg Wilson-Lindberg <[email protected]> wrote:
Thank you very much, that got me back on the right path.
Maybe I'll see you at the Yocto day at the Embedded Linux Conference.
Regards,
[image: cid:[email protected]]
*Greg Wilson-Lindberg *
*Principal Firmware Engineer | Sakura Finetek USA, Inc. *
1750 W 214th Street | Torrance, CA 90501 | U.S.A.
T: +1 310 783 5075
F: +1 310 618 6902 | E: [email protected]
www.sakuraus.com
[image: cid:[email protected]]
[image: cid:[email protected]]
------------------------------Confidentiality Notice: This e-mail transmission may contain confidential or legally privileged information that is intended only for the individual or entity named in the e-mail address. If you are not the intended recipient, you are hereby notified that any disclosure, copying, distribution, or reliance upon the contents of this e-mail is strictly prohibited. If you have received this e-mail transmission in error, please reply to the sender, so that Sakura Finetek USA, Inc. can arrange for proper delivery, and then please delete the message from your inbox. Thank you.
*From:* Rudolf J Streif [mailto:[email protected]] *Sent:* Wednesday, May 15, 2019 01:30 PM
*To:* Greg Wilson-Lindberg <[email protected]>; Yocto list discussion <[email protected]>
*Subject:* Re: [yocto] problem adding a userInstead of
useradd -p
openssl passwd testsakurawhich attempts to add the user and set the password which fails if the user already exists, use
usermod -p
openssl passwd testsakurawhich sets the user's password.
:rjs
On 5/15/19 1:18 PM, Greg Wilson-Lindberg wrote:
Ok, I had been using the useradd class in a couple of other recipes to allow me to copy files to the sakura user directory and another location, but owned by sakura. That seems to have been what was causing the problem.
I had been using the extrausers class in my top level image recipe.
So now how do I get all of this to work together? Do I need to put everything that touches the sakura user in the same recipe? It seems that I need to use only one of the useradd or extrausers classes?
Greg
------------------------------*From:* Rudolf J Streif <[email protected]> <[email protected]>
*Sent:* Wednesday, May 15, 2019 12:31 PM *To:* Greg Wilson-Lindberg; Yocto list discussion *Subject:* Re: [yocto] problem adding a userThe ! for the password in
/etc/shadowindicates that the account is disabled:sakura:!:18031:0:99999:7:::
Either there is something wrong with the password generation or it gets disabled by something else. Maybe it's worth trying with a plain image without Boot2Qt or anything else.
:rjs
On 5/15/19 11:46 AM, Greg Wilson-Lindberg wrote:
Hi Rudolf,
1st, yes I inherit extrausers. Attached are the passwd & shadow files.
It shouldn't make any difference, but I'm building this for an RPi3 using the Qt Boot2Qt version of the Yocto environment, distro 2.5.3.
Greg
------------------------------*From:* Rudolf J Streif <[email protected]> <[email protected]>
*Sent:* Wednesday, May 15, 2019 11:26 AM *To:* Greg Wilson-Lindberg; Yocto list discussion *Subject:* Re: [yocto] problem adding a userHi Greg,
Quoted 1 line
I've also tried both the back-quote and the single-quote, no
difference.
Help me to understand this. the back-quotes are the right ones. If you use the single ones your password in the
/etc/shadowends up being 'openssl passwd test' (without the quotes), unless the build fails because of a parsing error (I have not tried it). Silly question, you did inherit extrausers class?Can you post your
/etc/passwdand/etc/shadowI am surprised that this does not work with your setup. I have been doing this a gazillion times always with success.
:rjs
On 5/15/19 11:03 AM, Greg Wilson-Lindberg wrote:
Hi Rudolf,
Thanks for the reply, and the information on how openssl works.
I'm trying to create a user with the same group name so the code that I'm using reduces to:
EXTRA_USERS_PARAMS= "\useradd -p `openssl passwd test` sakura; \ usermod -a -G sudo ${SAKURA_USER}; \ "I also, as you can see, removed the macros to eliminate as much confusion as possible.
I still can't login in using the password 'test'.
I've also tried both the back-quote and the single-quote, no difference.
Regards,
Greg
------------------------------*From:* Rudolf J Streif <[email protected]> <[email protected]>
*Sent:* Wednesday, May 15, 2019 10:07:47 AM *To:* Greg Wilson-Lindberg; Yocto list discussion *Subject:* Re: [yocto] problem adding a userHi Greg,
Well, I suppose I wrote the book you are referring to...
Using
useradd -p PASSWORD USER
takes the password hash for PASSWORD hence the use of openssl in:
useadd -p
openssl passwd PASSWORDUSERopenssl password creates the password hash using the original crypt hash algorithm if no other options are specified. e.g.
$ openssl passwd hello 6hEsTksgRkeiIWith this the first two characters of the output is the salt and the rest is the password hash. If you want openssl to create the same result again:
$ openssl passwd -salt "6h" hello 6hEsTksgRkeiIYou can use newer algorithms like MD5 based BSD password algorithm 1:
$ openssl passwd -1 hello $1$4Mu8Fcs.$eIKgPP7RCYrb3lFZjhADA1$1 : password algorithm 1
$4Mu8Fcs. : salt
$eIKgPP7RCYrb3lFZjhADA1 : password hashIf you log into the system you have to use the clear password. The system reads the salt, creates the password hash and compares the results.
:rjs
Quoted 1 line · Greg Wilson-Lindberg
I'm trying to use the example in "Embedded Linux Systems with the
Yocto Project" to add a user to my Yocto build. In the book the sample code:
Quoted 4 lines
useradd -p `openssl passwd ${DEV_PASSWORD}` developer; \uses openssl to generate the encrypted password string to pass to
useradd. I have never been able to get this to work. When I run the openssl
Quoted 1 line
command on the cmd line I get a different value every time, this seems
wrong, How can the password code compare against it if every encode
Quoted 3 lines
produces a different value?
I am getting the user added to the system, the home directory shows up
and the user is in the passwd and group files. I just can't login to the
Quoted 6 lines
account.
I've obviously got something confused, any help would be appreciated.
Greg Wilson-Lindberg
--
-----
Rudolf J Streif
CEO/CTO ibeeto
+1.855.442.3396 x700--
-----
Rudolf J Streif
CEO/CTO ibeeto
+1.855.442.3396 x700
--
-----
Rudolf J Streif
CEO/CTO ibeeto
+1.855.442.3396 x700
--
-----
Rudolf J Streif
CEO/CTO ibeeto
+1.855.442.3396 x700
Signature · 3 lines
Rudolf J Streif CEO/CTO ibeeto, Streif Enterprises Inc.
Rudolf,
Here is the first half of the file, the whole file is over the 500k limit of free pastebin:
And here is the 2nd half of the file:
Greg
________________________________
From: Rudolf Streif <[email protected]>
Sent: Wednesday, May 22, 2019 12:42:40 PM
To: Greg Wilson-Lindberg
Cc: Yocto list discussion
Subject: Re: [yocto] problem adding a user
Greg,
Can you share the logfile via Pastebin?
:rjs
On Tue, May 21, 2019 at 11:09 AM Greg Wilson-Lindberg <[email protected]<mailto:[email protected]>> wrote:
Rudolf,
Something else is happening to me. I changed to this in the image recipe:
SAKURA_USER = "sakura"
SAKURA_PASSWD = "Distracted"SAKURA_PASS = "$1$QVO3K6Ii$fvkoDKnlzz3d5uVoL7KcM0"
EXTRA_USERS_PARAMS = "\
usermod -p '${SAKURA_PASS}' ${SAKURA_USER}; \
usermod -a -G sudo,dialout ${SAKURA_USER}; \
"deleting all of the commented out lines, and I get this in the log file:
..../scribe/1.0-r0/rootfs -p '' sakura]
nothing between the single quotes. It's acting like SAKURA_PASS is not defined.
This is only happening when I'm trying the MD5 password.
Greg
________________________________
From: Rudolf Streif <[email protected]<mailto:[email protected]>>
Sent: Tuesday, May 21, 2019 5:37:23 AM
To: Greg Wilson-Lindberg
Cc: Yocto list discussion
Subject: Re: [yocto] problem adding a user
Greg,
usermod does not work for the MD5 algorithm with the explicit password hash as it contains the $ field delimiters which are interpreted by the shell executing the usermod command. Use single quotes around the password hash:
usermod -p '${SAKURA_PASS}' ${SAKURA_USER};
:rjs
On Mon, May 20, 2019, 11:55 Greg Wilson-Lindberg <[email protected]<mailto:[email protected]>> wrote:
Hi Rudolf,
I've had more time to work with this and I'm still having problems getting everything to work properly. I've attached the image recipe recipe that I'm using so I don't leave any thing out that may be relevant.
When I build with a password that is no more more than 8 characters long and no non-alphabetic characters:
SAKURA_PASSWD = "Distract"SAKURA_PASS = "WRsDFfg1BsrDM"
everything works correctly.
I first tried that using the openssl ... form, and then I tried the -1, MD5 BSD form and had problems, so I changed to doing the openssl on the command line and making sure that I don't have any characters that display as '.' or '/'. Again, if I don't do more than 8 characters and no special characters everything works.
When I changed to using 'Ds$tr@ct' it stopped working. The build finishes and the log file shows the usermod being exectued correctly:
NOTE: scribe: Performing usermod with [-R /home/gwilson/Qt/Qt-5.12.3/Yocto-build-RPi3/build-raspberrypi3/tmp/work/raspberrypi3-poky-linux-gnueabi/scribe/1.0-r0/rootfs -p kyNsrvS0elMWU sakura]
NOTE: scribe: Performing usermod with [-R /home/gwilson/Qt/Qt-5.12.3/Yocto-build-RPi3/build-raspberrypi3/tmp/work/raspberrypi3-poky-linux-gnueabi/scribe/1.0-r0/rootfs -a -G sudo,dialout sakura]
But when I try to sign in it doesn't work.
I then tried the 10 character password 'Distracted', the build fails:
NOTE: scribe: Performing usermod with [-R /home/gwilson/Qt/Qt-5.12.3/Yocto-build-RPi3/build-raspberrypi3/tmp/work/raspberrypi3-poky-linux-gnueabi/scribe/1.0-r0/rootfs -p sakura]
Usage: usermod [options] LOGIN
Options:
-c, --comment COMMENT new value of the GECOS field
-d, --home HOME_DIR new home directory for the user account
-e, --expiredate EXPIRE_DATE set account expiration date to EXPIRE_DATE
-f, --inactive INACTIVE set password inactive after expiration
to INACTIVE
-g, --gid GROUP force use GROUP as new primary group
-G, --groups GROUPS new list of supplementary GROUPS
-a, --append append the user to the supplemental GROUPS
mentioned by the -G option without removing
him/her from other groups
-h, --help display this help message and exit
-l, --login NEW_LOGIN new value of the login name
-L, --lock lock the user account
-m, --move-home move contents of the home directory to the
new location (use only with -d)
-o, --non-unique allow using duplicate (non-unique) UID
-p, --password PASSWORD use encrypted password for the new password
-P, --clear-password PASSWORD use clear password for the new password
-R, --root CHROOT_DIR directory to chroot into
-s, --shell SHELL new login shell for the user account
-u, --uid UID new UID for the user account
-U, --unlock unlock the user account
-v, --add-subuids FIRST-LAST add range of subordinate uids
-V, --del-subuids FIRST-LAST remove range of subordinate uids
-w, --add-subgids FIRST-LAST add range of subordinate gids
-W, --del-subgids FIRST-LAST remove range of subordinate gidsERROR: scribe: usermod command did not succeed.
So, even though I'm putting in the openssl output:
openssl passwd -1 "Distracted" $1$QVO3K6Ii$fvkoDKnlzz3d5uVoL7KcM0
that I get back from what should be a valid run of openssl, I don't see anything from the password on the usermod command line:
"...linux-gnueabi/scribe/1.0-r0/rootfs -p sakura]"
I don't understand why the short passwords and passing along the proper hash works, but not the longer password.
It also doesn't make sense that I can't put in the '$' & '@' characters and have them work.
Any suggestions would be greatly appreciated.
Greg
________________________________
From: Rudolf Streif <[email protected]<mailto:[email protected]>>
Sent: Wednesday, May 15, 2019 4:58:26 PM
To: Greg Wilson-Lindberg
Cc: Yocto list discussion
Subject: Re: [yocto] problem adding a user
Glad to hear that it works now. I am planning on attending the YP DevDay.
:rjs
On Wed, May 15, 2019, 13:53 Greg Wilson-Lindberg <[email protected]<mailto:[email protected]>> wrote:
Thank you very much, that got me back on the right path.
Maybe I'll see you at the Yocto day at the Embedded Linux Conference.
Regards,
Greg Wilson-Lindberg
Principal Firmware Engineer | Sakura Finetek USA, Inc.
1750 W 214th Street | Torrance, CA 90501 | U.S.A.
T: +1 310 783 5075
F: +1 310 618 6902 | E: [email protected]<mailto:[email protected]>
www.sakuraus.com<http://www.sakuraus.com>
[cid:[email protected]]
[cid:[email protected]]
________________________________
Confidentiality Notice: This e-mail transmission may contain confidential or legally privileged information that is intended only for the individual or entity named in the e-mail address. If you are not the intended recipient, you are hereby notified that any disclosure, copying, distribution, or reliance upon the contents of this e-mail is strictly prohibited. If you have received this e-mail transmission in error, please reply to the sender, so that Sakura Finetek USA, Inc. can arrange for proper delivery, and then please delete the message from your inbox. Thank you.
From: Rudolf J Streif [mailto:[email protected]<mailto:[email protected]>]
Sent: Wednesday, May 15, 2019 01:30 PM
To: Greg Wilson-Lindberg <[email protected]<mailto:[email protected]>>; Yocto list discussion <[email protected]<mailto:[email protected]>>
Subject: Re: [yocto] problem adding a user
Instead of
useradd -p openssl passwd test sakura
which attempts to add the user and set the password which fails if the user already exists, use
usermod -p openssl passwd test sakura
which sets the user's password.
:rjs
On 5/15/19 1:18 PM, Greg Wilson-Lindberg wrote:
Ok, I had been using the useradd class in a couple of other recipes to allow me to copy files to the sakura user directory and another location, but owned by sakura. That seems to have been what was causing the problem.
I had been using the extrausers class in my top level image recipe.
So now how do I get all of this to work together? Do I need to put everything that touches the sakura user in the same recipe? It seems that I need to use only one of the useradd or extrausers classes?
Greg
________________________________
From: Rudolf J Streif <[email protected]><mailto:[email protected]>
Sent: Wednesday, May 15, 2019 12:31 PM
To: Greg Wilson-Lindberg; Yocto list discussion
Subject: Re: [yocto] problem adding a user
The ! for the password in /etc/shadow indicates that the account is disabled:
sakura:!:18031:0:99999:7:::
Either there is something wrong with the password generation or it gets disabled by something else. Maybe it's worth trying with a plain image without Boot2Qt or anything else.
:rjs
On 5/15/19 11:46 AM, Greg Wilson-Lindberg wrote:
Hi Rudolf,
1st, yes I inherit extrausers. Attached are the passwd & shadow files.
It shouldn't make any difference, but I'm building this for an RPi3 using the Qt Boot2Qt version of the Yocto environment, distro 2.5.3.
Greg
________________________________
From: Rudolf J Streif <[email protected]><mailto:[email protected]>
Sent: Wednesday, May 15, 2019 11:26 AM
To: Greg Wilson-Lindberg; Yocto list discussion
Subject: Re: [yocto] problem adding a user
Hi Greg,
Quoted 1 line
I've also tried both the back-quote and the single-quote, no difference.
Help me to understand this. the back-quotes are the right ones. If you use the single ones your password in the /etc/shadow ends up being 'openssl passwd test' (without the quotes), unless the build fails because of a parsing error (I have not tried it). Silly question, you did inherit extrausers class?
Can you post your /etc/passwd and /etc/shadow
I am surprised that this does not work with your setup. I have been doing this a gazillion times always with success.
:rjs
On 5/15/19 11:03 AM, Greg Wilson-Lindberg wrote:
Hi Rudolf,
Thanks for the reply, and the information on how openssl works.
I'm trying to create a user with the same group name so the code that I'm using reduces to:
EXTRA_USERS_PARAMS = "\
useradd -p `openssl passwd test` sakura; \
usermod -a -G sudo ${SAKURA_USER}; \
"I also, as you can see, removed the macros to eliminate as much confusion as possible.
I still can't login in using the password 'test'.
I've also tried both the back-quote and the single-quote, no difference.
Regards,
Greg
________________________________
From: Rudolf J Streif <[email protected]><mailto:[email protected]>
Sent: Wednesday, May 15, 2019 10:07:47 AM
To: Greg Wilson-Lindberg; Yocto list discussion
Subject: Re: [yocto] problem adding a user
Hi Greg,
Well, I suppose I wrote the book you are referring to...
Using
useradd -p PASSWORD USER
takes the password hash for PASSWORD hence the use of openssl in:
useadd -p openssl passwd PASSWORD USER
openssl password creates the password hash using the original crypt hash algorithm if no other options are specified. e.g.
$ openssl passwd hello 6hEsTksgRkeiI
With this the first two characters of the output is the salt and the rest is the password hash. If you want openssl to create the same result again:
$ openssl passwd -salt "6h" hello 6hEsTksgRkeiI
You can use newer algorithms like MD5 based BSD password algorithm 1:
$ openssl passwd -1 hello $1$4Mu8Fcs.$eIKgPP7RCYrb3lFZjhADA1
$1 : password algorithm 1
$4Mu8Fcs. : salt
$eIKgPP7RCYrb3lFZjhADA1 : password hash
If you log into the system you have to use the clear password. The system reads the salt, creates the password hash and compares the results.
:rjs
Quoted 8 lines · Greg Wilson-Lindberg
I'm trying to use the example in "Embedded Linux Systems with the Yocto Project" to add a user to my Yocto build. In the book the sample code:
useradd -p `openssl passwd ${DEV_PASSWORD}` developer; \uses openssl to generate the encrypted password string to pass to useradd. I have never been able to get this to work. When I run the openssl command on the cmd line I get a different value every time, this seems wrong, How can the password code compare against it if every encode produces a different value?
Quoted 7 lines
I am getting the user added to the system, the home directory shows up and the user is in the passwd and group files. I just can't login to the account.
I've obviously got something confused, any help would be appreciated.
Greg Wilson-Lindberg
--
-----
Rudolf J Streif
CEO/CTO ibeeto
+1.855.442.3396 x700
--
-----
Rudolf J Streif
CEO/CTO ibeeto
+1.855.442.3396 x700
--
-----
Rudolf J Streif
CEO/CTO ibeeto
+1.855.442.3396 x700
--
-----
Rudolf J Streif
CEO/CTO ibeeto
+1.855.442.3396 x700
--
Rudolf J Streif
CEO/CTO
ibeeto, Streif Enterprises Inc.
Greg,
It eluded me earlier but in both instances the variable containing the password does not seem to be expanded.
First version without the single quotes:
SAKURA_PASS = "$1$QVO3K6Ii$fvkoDKnlzz3d5uVoL7KcM0"
EXTRA_USERS_PARAMS = "\
usermod -p ${SAKURA_PASS} ${SAKURA_USER}; \
usermod -a -G sudo,dialout ${SAKURA_USER}; \
"results in:
NOTE: scribe: Performing usermod with [-R /home/gwilson/Qt/Qt-5.12.3/Yocto-build-RPi3/build-raspberrypi3/tmp/work/raspberrypi3-poky-linux-gnueabi/scribe/1.0-r0/rootfs -p sakura]
and with the quotes:
SAKURA_PASS = "$1$QVO3K6Ii$fvkoDKnlzz3d5uVoL7KcM0"
EXTRA_USERS_PARAMS = "\
usermod -p '${SAKURA_PASS}' ${SAKURA_USER}; \
usermod -a -G sudo,dialout ${SAKURA_USER}; \
"results in:
NOTE: scribe: Performing usermod with [-R /home/gwilson/Qt/Qt-5.12.3/Yocto-build-RPi3/build-raspberrypi3/tmp/work/raspberrypi3-poky-linux-gnueabi/scribe/1.0-r0/rootfs -p '' sakura]
It looks as if the variable SAKURA_PASS is not set at all. I looked at your scribe.bb recipe you attached earlier but I could not find any reason why the variable is not set. Is there a chance that it is overridden somewhere elase?
:rjs
Quoted 508 lines · Greg Wilson-Lindberg
Rudolf,
Here is the first half of the file, the whole file is over the 500k limit of free pastebin:
And here is the 2nd half of the file:
Greg
------------------------------
*From:* Rudolf Streif <[email protected]>
*Sent:* Wednesday, May 22, 2019 12:42:40 PM
*To:* Greg Wilson-Lindberg
*Cc:* Yocto list discussion
*Subject:* Re: [yocto] problem adding a userGreg,
Can you share the logfile via Pastebin?
:rjsQuoted 41 lines · Greg Wilson-Lindberg
Rudolf,
Something else is happening to me. I changed to this in the image recipe:
SAKURA_USER= "sakura"
SAKURA_PASSWD= "Distracted"SAKURA_PASS= "$1$QVO3K6Ii$fvkoDKnlzz3d5uVoL7KcM0"EXTRA_USERS_PARAMS = "\ usermod -p '${SAKURA_PASS}' ${SAKURA_USER}; \ usermod -a -G sudo,dialout ${SAKURA_USER}; \ "deleting all of the commented out lines, and I get this in the log file:
..../scribe/1.0-r0/rootfs -p '' sakura]
nothing between the single quotes. It's acting like
SAKURA_PASSis not defined.This is only happening when I'm trying the MD5 password.
Greg
------------------------------
*From:* Rudolf Streif <[email protected]>
*Sent:* Tuesday, May 21, 2019 5:37:23 AM
*To:* Greg Wilson-Lindberg
*Cc:* Yocto list discussion
*Subject:* Re: [yocto] problem adding a userGreg,
usermod does not work for the MD5 algorithm with the explicit password hash as it contains the $ field delimiters which are interpreted by the shell executing the usermod command. Use single quotes around the password hash:
Quoted 433 lines
usermod -p '${SAKURA_PASS}' ${SAKURA_USER};
:rjs
Quoted 426 lines · On Mon, May 20, 2019, 11:55 Greg Wilson-Lindberg <[email protected]> wrote:
Hi Rudolf,
I've had more time to work with this and I'm still having problems getting everything to work properly. I've attached the image recipe recipe that I'm using so I don't leave any thing out that may be relevant.
When I build with a password that is no more more than 8 characters long and no non-alphabetic characters:
SAKURA_PASSWD= "Distract"SAKURA_PASS= "WRsDFfg1BsrDM"everything works correctly.
I first tried that using the
openssl ...form, and then I tried the -1, MD5 BSD form and had problems, so I changed to doing the openssl on the command line and making sure that I don't have any characters that display as '.' or '/'. Again, if I don't do more than 8 characters and no special characters everything works.When I changed to using 'Ds$tr@ct' it stopped working. The build finishes and the log file shows the usermod being exectued correctly:
NOTE: scribe: Performing usermod with [-R
/home/gwilson/Qt/Qt-5.12.3/Yocto-build-RPi3/build-raspberrypi3/tmp/work/raspberrypi3-poky-linux-gnueabi/scribe/1.0-r0/rootfs-p kyNsrvS0elMWU sakura]
NOTE: scribe: Performing usermod with [-R/home/gwilson/Qt/Qt-5.12.3/Yocto-build-RPi3/build-raspberrypi3/tmp/work/raspberrypi3-poky-linux-gnueabi/scribe/1.0-r0/rootfs-a -G sudo,dialout sakura]But when I try to sign in it doesn't work.
I then tried the 10 character password 'Distracted', the build fails:
NOTE: scribe: Performing usermod with [-R
/home/gwilson/Qt/Qt-5.12.3/Yocto-build-RPi3/build-raspberrypi3/tmp/work/raspberrypi3-poky-linux-gnueabi/scribe/1.0-r0/rootfs-p sakura]
Usage: usermod [options] LOGINOptions:
-c, --comment COMMENT new value of the GECOS field -d, --home HOME_DIR new home directory for the user account -e, --expiredate EXPIRE_DATE set account expiration date to EXPIRE_DATE -f, --inactive INACTIVE set password inactive after expiration to INACTIVE -g, --gid GROUP force use GROUP as new primary group -G, --groups GROUPS new list of supplementary GROUPS -a, --append append the user to the supplemental GROUPS mentioned by the -G option without removing him/her from other groups -h, --help display this help message and exit -l, --login NEW_LOGIN new value of the login name -L, --lock lock the user account -m, --move-home move contents of the home directory to the new location (use only with -d) -o, --non-unique allow using duplicate (non-unique) UID -p, --password PASSWORD use encrypted password for the new password -P, --clear-password PASSWORD use clear password for the new password -R, --root CHROOT_DIR directory to chroot into -s, --shell SHELL new login shell for the user account -u, --uid UID new UID for the user account -U, --unlock unlock the user account -v, --add-subuids FIRST-LAST add range of subordinate uids -V, --del-subuids FIRST-LAST remove range of subordinate uids -w, --add-subgids FIRST-LAST add range of subordinate gids -W, --del-subgids FIRST-LAST remove range of subordinate gidsERROR: scribe: usermod command did not succeed.
So, even though I'm putting in the openssl output:
openssl passwd -1 "Distracted" $1$QVO3K6Ii$fvkoDKnlzz3d5uVoL7KcM0that I get back from what should be a valid run of openssl, I don't see anything from the password on the usermod command line:
"...linux-gnueabi/scribe/1.0-r0/rootfs -p sakura]"I don't understand why the short passwords and passing along the proper hash works, but not the longer password.
It also doesn't make sense that I can't put in the '$' & '@' characters and have them work.
Any suggestions would be greatly appreciated.
Greg
------------------------------
*From:* Rudolf Streif <[email protected]>
*Sent:* Wednesday, May 15, 2019 4:58:26 PM
*To:* Greg Wilson-Lindberg
*Cc:* Yocto list discussion
*Subject:* Re: [yocto] problem adding a userGlad to hear that it works now. I am planning on attending the YP DevDay.
:rjs
Quoted 330 lines · On Wed, May 15, 2019, 13:53 Greg Wilson-Lindberg <[email protected]> wrote:
Thank you very much, that got me back on the right path.
Maybe I'll see you at the Yocto day at the Embedded Linux Conference.
Regards,
[image: cid:[email protected]]
*Greg Wilson-Lindberg *
*Principal Firmware Engineer | Sakura Finetek USA, Inc. *
1750 W 214th Street | Torrance, CA 90501 | U.S.A.
T: +1 310 783 5075
F: +1 310 618 6902 | E: [email protected]
www.sakuraus.com
[image: cid:[email protected]]
[image: cid:[email protected]]
------------------------------Confidentiality Notice: This e-mail transmission may contain confidential or legally privileged information that is intended only for the individual or entity named in the e-mail address. If you are not the intended recipient, you are hereby notified that any disclosure, copying, distribution, or reliance upon the contents of this e-mail is strictly prohibited. If you have received this e-mail transmission in error, please reply to the sender, so that Sakura Finetek USA, Inc. can arrange for proper delivery, and then please delete the message from your inbox. Thank you.
*From:* Rudolf J Streif [mailto:[email protected]] *Sent:* Wednesday, May 15, 2019 01:30 PM
*To:* Greg Wilson-Lindberg <[email protected]>; Yocto list discussion <[email protected]>
*Subject:* Re: [yocto] problem adding a userInstead of
useradd -p
openssl passwd testsakurawhich attempts to add the user and set the password which fails if the user already exists, use
usermod -p
openssl passwd testsakurawhich sets the user's password.
:rjs
On 5/15/19 1:18 PM, Greg Wilson-Lindberg wrote:
Ok, I had been using the useradd class in a couple of other recipes to allow me to copy files to the sakura user directory and another location, but owned by sakura. That seems to have been what was causing the problem.
I had been using the extrausers class in my top level image recipe.
So now how do I get all of this to work together? Do I need to put everything that touches the sakura user in the same recipe? It seems that I need to use only one of the useradd or extrausers classes?
Greg
------------------------------*From:* Rudolf J Streif <[email protected]> <[email protected]>
*Sent:* Wednesday, May 15, 2019 12:31 PM *To:* Greg Wilson-Lindberg; Yocto list discussion *Subject:* Re: [yocto] problem adding a userThe ! for the password in
/etc/shadowindicates that the account is disabled:sakura:!:18031:0:99999:7:::
Either there is something wrong with the password generation or it gets disabled by something else. Maybe it's worth trying with a plain image without Boot2Qt or anything else.
:rjs
On 5/15/19 11:46 AM, Greg Wilson-Lindberg wrote:
Hi Rudolf,
1st, yes I inherit extrausers. Attached are the passwd & shadow files.
It shouldn't make any difference, but I'm building this for an RPi3 using the Qt Boot2Qt version of the Yocto environment, distro 2.5.3.
Greg
------------------------------*From:* Rudolf J Streif <[email protected]> <[email protected]>
*Sent:* Wednesday, May 15, 2019 11:26 AM *To:* Greg Wilson-Lindberg; Yocto list discussion *Subject:* Re: [yocto] problem adding a userHi Greg,
Quoted 1 line
I've also tried both the back-quote and the single-quote, no
difference.
Help me to understand this. the back-quotes are the right ones. If you use the single ones your password in the
/etc/shadowends up being 'openssl passwd test' (without the quotes), unless the build fails because of a parsing error (I have not tried it). Silly question, you did inherit extrausers class?Can you post your
/etc/passwdand/etc/shadowI am surprised that this does not work with your setup. I have been doing this a gazillion times always with success.
:rjs
On 5/15/19 11:03 AM, Greg Wilson-Lindberg wrote:
Hi Rudolf,
Thanks for the reply, and the information on how openssl works.
I'm trying to create a user with the same group name so the code that I'm using reduces to:
EXTRA_USERS_PARAMS= "\useradd -p `openssl passwd test` sakura; \ usermod -a -G sudo ${SAKURA_USER}; \ "I also, as you can see, removed the macros to eliminate as much confusion as possible.
I still can't login in using the password 'test'.
I've also tried both the back-quote and the single-quote, no difference.
Regards,
Greg
------------------------------*From:* Rudolf J Streif <[email protected]> <[email protected]>
*Sent:* Wednesday, May 15, 2019 10:07:47 AM *To:* Greg Wilson-Lindberg; Yocto list discussion *Subject:* Re: [yocto] problem adding a userHi Greg,
Well, I suppose I wrote the book you are referring to...
Using
useradd -p PASSWORD USER
takes the password hash for PASSWORD hence the use of openssl in:
useadd -p
openssl passwd PASSWORDUSERopenssl password creates the password hash using the original crypt hash
algorithm if no other options are specified. e.g.$ openssl passwd hello 6hEsTksgRkeiIWith this the first two characters of the output is the salt and the rest is the password hash. If you want openssl to create the same result
again:$ openssl passwd -salt "6h" hello 6hEsTksgRkeiIYou can use newer algorithms like MD5 based BSD password algorithm 1:
$ openssl passwd -1 hello $1$4Mu8Fcs.$eIKgPP7RCYrb3lFZjhADA1$1 : password algorithm 1
$4Mu8Fcs. : salt
$eIKgPP7RCYrb3lFZjhADA1 : password hashIf you log into the system you have to use the clear password. The system reads the salt, creates the password hash and compares the results.
:rjs
Quoted 1 line · Greg Wilson-Lindberg
I'm trying to use the example in "Embedded Linux Systems with the
Yocto Project" to add a user to my Yocto build. In the book the sample code:
Quoted 4 lines
useradd -p `openssl passwd ${DEV_PASSWORD}` developer; \uses openssl to generate the encrypted password string to pass to
useradd. I have never been able to get this to work. When I run the openssl
Quoted 1 line
command on the cmd line I get a different value every time, this
seems wrong, How can the password code compare against it if every encode
Quoted 3 lines
produces a different value?
I am getting the user added to the system, the home directory shows
up and the user is in the passwd and group files. I just can't login to the
Quoted 6 lines
account.
I've obviously got something confused, any help would be appreciated.
Greg Wilson-Lindberg
--
-----
Rudolf J Streif
CEO/CTO ibeeto
+1.855.442.3396 x700--
-----
Rudolf J Streif
CEO/CTO ibeeto
+1.855.442.3396 x700
--
-----
Rudolf J Streif
CEO/CTO ibeeto
+1.855.442.3396 x700
--
-----
Rudolf J Streif
CEO/CTO ibeeto
+1.855.442.3396 x700
--
Rudolf J Streif
CEO/CTO
ibeeto, Streif Enterprises Inc.
Signature · 3 lines
Rudolf J Streif CEO/CTO ibeeto, Streif Enterprises Inc.
Hello Rudolf, Greg,
Quoted 4 lines · Rudolf Streif
It eluded me earlier but in both instances the variable containing the password does not seem to be expanded.
Could it be the spaces around the = equal sign must be removed?
https://unix.stackexchange.com/questions/258727/spaces-in-variable-assignments-in-shell-scripts
Regards, Leon
Quoted 554 lines
First version without the single quotes:
SAKURA_PASS= "$1$QVO3K6Ii$fvkoDKnlzz3d5uVoL7KcM0"EXTRA_USERS_PARAMS = "\ usermod -p ${SAKURA_PASS} ${SAKURA_USER}; \ usermod -a -G sudo,dialout ${SAKURA_USER}; \ "results in:
NOTE: scribe: Performing usermod with [-R
/home/gwilson/Qt/Qt-5.12.3/Yocto-build-RPi3/build-raspberrypi3/tmp/work/raspberrypi3-poky-linux-gnueabi/scribe/1.0-r0/rootfs-p sakura]and with the quotes:
SAKURA_PASS= "$1$QVO3K6Ii$fvkoDKnlzz3d5uVoL7KcM0"EXTRA_USERS_PARAMS = "\ usermod -p '${SAKURA_PASS}' ${SAKURA_USER}; \ usermod -a -G sudo,dialout ${SAKURA_USER}; \ "results in:
NOTE: scribe: Performing usermod with [-R/home/gwilson/Qt/Qt-5.12.3/Yocto-build-RPi3/build-raspberrypi3/tmp/work/raspberrypi3-poky-linux-gnueabi/scribe/1.0-r0/rootfs-p '' sakura]It looks as if the variable
SAKURA_PASSis not set at all. I looked at your scribe.bb recipe you attached earlier but I could not find any reason why the variable is not set. Is there a chance that it is overridden somewhere elase?:rjs
Quoted 502 lines · Greg Wilson-Lindberg
Rudolf,
Here is the first half of the file, the whole file is over the 500k limit of free pastebin:
And here is the 2nd half of the file:
Greg
------------------------------
*From:* Rudolf Streif <[email protected]>
*Sent:* Wednesday, May 22, 2019 12:42:40 PM
*To:* Greg Wilson-Lindberg
*Cc:* Yocto list discussion
*Subject:* Re: [yocto] problem adding a userGreg,
Can you share the logfile via Pastebin?
:rjsQuoted 474 lines · Greg Wilson-Lindberg
Rudolf,
Something else is happening to me. I changed to this in the image recipe:
SAKURA_USER= "sakura"
SAKURA_PASSWD= "Distracted"SAKURA_PASS= "$1$QVO3K6Ii$fvkoDKnlzz3d5uVoL7KcM0"EXTRA_USERS_PARAMS = "\ usermod -p '${SAKURA_PASS}' ${SAKURA_USER}; \ usermod -a -G sudo,dialout ${SAKURA_USER}; \ "deleting all of the commented out lines, and I get this in the log file:
..../scribe/1.0-r0/rootfs -p '' sakura]
nothing between the single quotes. It's acting like
SAKURA_PASSis not defined.This is only happening when I'm trying the MD5 password.
Greg
------------------------------
*From:* Rudolf Streif <[email protected]>
*Sent:* Tuesday, May 21, 2019 5:37:23 AM
*To:* Greg Wilson-Lindberg
*Cc:* Yocto list discussion
*Subject:* Re: [yocto] problem adding a userGreg,
usermod does not work for the MD5 algorithm with the explicit password hash as it contains the $ field delimiters which are interpreted by the shell executing the usermod command. Use single quotes around the password hash:
usermod -p '${SAKURA_PASS}' ${SAKURA_USER};
:rjs
Quoted 426 lines · On Mon, May 20, 2019, 11:55 Greg Wilson-Lindberg <[email protected]> wrote:
Hi Rudolf,
I've had more time to work with this and I'm still having problems getting everything to work properly. I've attached the image recipe recipe that I'm using so I don't leave any thing out that may be relevant.
When I build with a password that is no more more than 8 characters long and no non-alphabetic characters:
SAKURA_PASSWD= "Distract"SAKURA_PASS= "WRsDFfg1BsrDM"everything works correctly.
I first tried that using the
openssl ...form, and then I tried the -1, MD5 BSD form and had problems, so I changed to doing the openssl on the command line and making sure that I don't have any characters that display as '.' or '/'. Again, if I don't do more than 8 characters and no special characters everything works.When I changed to using 'Ds$tr@ct' it stopped working. The build finishes and the log file shows the usermod being exectued correctly:
NOTE: scribe: Performing usermod with [-R
/home/gwilson/Qt/Qt-5.12.3/Yocto-build-RPi3/build-raspberrypi3/tmp/work/raspberrypi3-poky-linux-gnueabi/scribe/1.0-r0/rootfs-p kyNsrvS0elMWU sakura]
NOTE: scribe: Performing usermod with [-R/home/gwilson/Qt/Qt-5.12.3/Yocto-build-RPi3/build-raspberrypi3/tmp/work/raspberrypi3-poky-linux-gnueabi/scribe/1.0-r0/rootfs-a -G sudo,dialout sakura]But when I try to sign in it doesn't work.
I then tried the 10 character password 'Distracted', the build fails:
NOTE: scribe: Performing usermod with [-R
/home/gwilson/Qt/Qt-5.12.3/Yocto-build-RPi3/build-raspberrypi3/tmp/work/raspberrypi3-poky-linux-gnueabi/scribe/1.0-r0/rootfs-p sakura]
Usage: usermod [options] LOGINOptions:
-c, --comment COMMENT new value of the GECOS field -d, --home HOME_DIR new home directory for the user account -e, --expiredate EXPIRE_DATE set account expiration date to EXPIRE_DATE -f, --inactive INACTIVE set password inactive after expiration to INACTIVE -g, --gid GROUP force use GROUP as new primary group -G, --groups GROUPS new list of supplementary GROUPS -a, --append append the user to the supplemental GROUPS mentioned by the -G option without removing him/her from other groups -h, --help display this help message and exit -l, --login NEW_LOGIN new value of the login name -L, --lock lock the user account -m, --move-home move contents of the home directory to the new location (use only with -d) -o, --non-unique allow using duplicate (non-unique) UID -p, --password PASSWORD use encrypted password for the new password -P, --clear-password PASSWORD use clear password for the new password -R, --root CHROOT_DIR directory to chroot into -s, --shell SHELL new login shell for the user account -u, --uid UID new UID for the user account -U, --unlock unlock the user account -v, --add-subuids FIRST-LAST add range of subordinate uids -V, --del-subuids FIRST-LAST remove range of subordinate uids -w, --add-subgids FIRST-LAST add range of subordinate gids -W, --del-subgids FIRST-LAST remove range of subordinate gidsERROR: scribe: usermod command did not succeed.
So, even though I'm putting in the openssl output:
openssl passwd -1 "Distracted" $1$QVO3K6Ii$fvkoDKnlzz3d5uVoL7KcM0that I get back from what should be a valid run of openssl, I don't see anything from the password on the usermod command line:
"...linux-gnueabi/scribe/1.0-r0/rootfs -p sakura]"I don't understand why the short passwords and passing along the proper hash works, but not the longer password.
It also doesn't make sense that I can't put in the '$' & '@' characters and have them work.
Any suggestions would be greatly appreciated.
Greg
------------------------------
*From:* Rudolf Streif <[email protected]>
*Sent:* Wednesday, May 15, 2019 4:58:26 PM
*To:* Greg Wilson-Lindberg
*Cc:* Yocto list discussion
*Subject:* Re: [yocto] problem adding a userGlad to hear that it works now. I am planning on attending the YP DevDay.
:rjs
Quoted 330 lines · On Wed, May 15, 2019, 13:53 Greg Wilson-Lindberg <[email protected]> wrote:
Thank you very much, that got me back on the right path.
Maybe I'll see you at the Yocto day at the Embedded Linux Conference.
Regards,
[image: cid:[email protected]]
*Greg Wilson-Lindberg *
*Principal Firmware Engineer | Sakura Finetek USA, Inc. *
1750 W 214
<https://maps.google.com/?q=1750+W+214&entry=gmail&source=g>th Street | Torrance, CA 90501 | U.S.A.T: +1 310 783 5075
F: +1 310 618 6902 | E: [email protected]
www.sakuraus.com
[image: cid:[email protected]]
[image: cid:[email protected]]
------------------------------Confidentiality Notice: This e-mail transmission may contain confidential or legally privileged information that is intended only for the individual or entity named in the e-mail address. If you are not the intended recipient, you are hereby notified that any disclosure, copying, distribution, or reliance upon the contents of this e-mail is strictly prohibited. If you have received this e-mail transmission in error, please reply to the sender, so that Sakura Finetek USA, Inc. can arrange for proper delivery, and then please delete the message from your inbox. Thank you.
*From:* Rudolf J Streif [mailto:[email protected]] *Sent:* Wednesday, May 15, 2019 01:30 PM
*To:* Greg Wilson-Lindberg <[email protected]>; Yocto list discussion <[email protected]>
*Subject:* Re: [yocto] problem adding a userInstead of
useradd -p
openssl passwd testsakurawhich attempts to add the user and set the password which fails if the user already exists, use
usermod -p
openssl passwd testsakurawhich sets the user's password.
:rjs
On 5/15/19 1:18 PM, Greg Wilson-Lindberg wrote:
Ok, I had been using the useradd class in a couple of other recipes to allow me to copy files to the sakura user directory and another location, but owned by sakura. That seems to have been what was causing the problem.
I had been using the extrausers class in my top level image recipe.
So now how do I get all of this to work together? Do I need to put everything that touches the sakura user in the same recipe? It seems that I need to use only one of the useradd or extrausers classes?
Greg
------------------------------*From:* Rudolf J Streif <[email protected]> <[email protected]>
*Sent:* Wednesday, May 15, 2019 12:31 PM *To:* Greg Wilson-Lindberg; Yocto list discussion *Subject:* Re: [yocto] problem adding a userThe ! for the password in
/etc/shadowindicates that the account is disabled:sakura:!:18031:0:99999:7:::
Either there is something wrong with the password generation or it gets disabled by something else. Maybe it's worth trying with a plain image without Boot2Qt or anything else.
:rjs
On 5/15/19 11:46 AM, Greg Wilson-Lindberg wrote:
Hi Rudolf,
1st, yes I inherit extrausers. Attached are the passwd & shadow files.
It shouldn't make any difference, but I'm building this for an RPi3 using the Qt Boot2Qt version of the Yocto environment, distro 2.5.3.
Greg
------------------------------*From:* Rudolf J Streif <[email protected]> <[email protected]>
*Sent:* Wednesday, May 15, 2019 11:26 AM *To:* Greg Wilson-Lindberg; Yocto list discussion *Subject:* Re: [yocto] problem adding a userHi Greg,
Quoted 1 line
I've also tried both the back-quote and the single-quote, no
difference.
Help me to understand this. the back-quotes are the right ones. If you use the single ones your password in the
/etc/shadowends up being 'openssl passwd test' (without the quotes), unless the build fails because of a parsing error (I have not tried it). Silly question, you did inherit extrausers class?Can you post your
/etc/passwdand/etc/shadowI am surprised that this does not work with your setup. I have been doing this a gazillion times always with success.
:rjs
On 5/15/19 11:03 AM, Greg Wilson-Lindberg wrote:
Hi Rudolf,
Thanks for the reply, and the information on how openssl works.
I'm trying to create a user with the same group name so the code that I'm using reduces to:
EXTRA_USERS_PARAMS= "\useradd -p `openssl passwd test` sakura; \ usermod -a -G sudo ${SAKURA_USER}; \ "I also, as you can see, removed the macros to eliminate as much confusion as possible.
I still can't login in using the password 'test'.
I've also tried both the back-quote and the single-quote, no difference.
Regards,
Greg
------------------------------*From:* Rudolf J Streif <[email protected]> <[email protected]>
*Sent:* Wednesday, May 15, 2019 10:07:47 AM *To:* Greg Wilson-Lindberg; Yocto list discussion *Subject:* Re: [yocto] problem adding a userHi Greg,
Well, I suppose I wrote the book you are referring to...
Using
useradd -p PASSWORD USER
takes the password hash for PASSWORD hence the use of openssl in:
useadd -p
openssl passwd PASSWORDUSERopenssl password creates the password hash using the original crypt hash
algorithm if no other options are specified. e.g.$ openssl passwd hello 6hEsTksgRkeiIWith this the first two characters of the output is the salt and the rest is the password hash. If you want openssl to create the same result
again:$ openssl passwd -salt "6h" hello 6hEsTksgRkeiIYou can use newer algorithms like MD5 based BSD password algorithm 1:
$ openssl passwd -1 hello $1$4Mu8Fcs.$eIKgPP7RCYrb3lFZjhADA1$1 : password algorithm 1
$4Mu8Fcs. : salt
$eIKgPP7RCYrb3lFZjhADA1 : password hashIf you log into the system you have to use the clear password. The system reads the salt, creates the password hash and compares the results.
:rjs
Quoted 1 line · Greg Wilson-Lindberg
I'm trying to use the example in "Embedded Linux Systems with the
Yocto Project" to add a user to my Yocto build. In the book the sample code:
Quoted 4 lines
useradd -p `openssl passwd ${DEV_PASSWORD}` developer; \uses openssl to generate the encrypted password string to pass to
useradd. I have never been able to get this to work. When I run the openssl
Quoted 1 line
command on the cmd line I get a different value every time, this
seems wrong, How can the password code compare against it if every encode
Quoted 3 lines
produces a different value?
I am getting the user added to the system, the home directory shows
up and the user is in the passwd and group files. I just can't login to the
Quoted 6 lines
account.
I've obviously got something confused, any help would be appreciated.
Greg Wilson-Lindberg
--
-----
Rudolf J Streif
CEO/CTO ibeeto
+1.855.442.3396 x700--
-----
Rudolf J Streif
CEO/CTO ibeeto
+1.855.442.3396 x700
--
-----
Rudolf J Streif
CEO/CTO ibeeto
+1.855.442.3396 x700
--
-----
Rudolf J Streif
CEO/CTO ibeeto
Quoted 9 lines
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
+1.855.442.3396 x700
--
Rudolf J Streif
CEO/CTO
ibeeto, Streif Enterprises Inc.--
Rudolf J Streif
CEO/CTO
ibeeto, Streif Enterprises Inc.
--
_______________________________________________
yocto mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/yocto
Signature · 9 lines
Leon Woestenberg [email protected] T: +31 40 711 42 76 M: +31 6 472 30 372 Sidebranch Embedded Systems Eindhoven, The Netherlands http://www.sidebranch.com
Hi Leon & Rudolf,
I first changed to SAKURA1_1PASS, with no change in symptoms, I then deleted the spaces, again not change.
Next I just copied the hash into the usermod line:
usermod -p '$1$QVO3K6Ii$fvkoDKnlzz3d5uVoL7KcM0' ${SAKURA_USER}; \And again I get nothing in the output just the adjacent single quotes " '' ". Something is removing the encoded hash.
Greg
________________________________
From: Leon Woestenberg <[email protected]>
Sent: Thursday, May 23, 2019 2:44:04 PM
To: Rudolf Streif
Cc: Greg Wilson-Lindberg; Yocto list discussion
Subject: Re: [yocto] problem adding a user
Hello Rudolf, Greg,
On Thu, 23 May 2019 at 22:43, Rudolf Streif <[email protected]<mailto:[email protected]>> wrote:
It eluded me earlier but in both instances the variable containing the password does not seem to be expanded.
Could it be the spaces around the = equal sign must be removed?
https://unix.stackexchange.com/questions/258727/spaces-in-variable-assignments-in-shell-scripts
Regards, Leon
First version without the single quotes:
SAKURA_PASS = "$1$QVO3K6Ii$fvkoDKnlzz3d5uVoL7KcM0"
EXTRA_USERS_PARAMS = "\
usermod -p ${SAKURA_PASS} ${SAKURA_USER}; \
usermod -a -G sudo,dialout ${SAKURA_USER}; \
"results in:
NOTE: scribe: Performing usermod with [-R /home/gwilson/Qt/Qt-5.12.3/Yocto-build-RPi3/build-raspberrypi3/tmp/work/raspberrypi3-poky-linux-gnueabi/scribe/1.0-r0/rootfs -p sakura]
and with the quotes:
SAKURA_PASS = "$1$QVO3K6Ii$fvkoDKnlzz3d5uVoL7KcM0"
EXTRA_USERS_PARAMS = "\
usermod -p '${SAKURA_PASS}' ${SAKURA_USER}; \
usermod -a -G sudo,dialout ${SAKURA_USER}; \
"results in:
NOTE: scribe: Performing usermod with [-R /home/gwilson/Qt/Qt-5.12.3/Yocto-build-RPi3/build-raspberrypi3/tmp/work/raspberrypi3-poky-linux-gnueabi/scribe/1.0-r0/rootfs -p '' sakura]
It looks as if the variable SAKURA_PASS is not set at all. I looked at your scribe.bb<http://scribe.bb> recipe you attached earlier but I could not find any reason why the variable is not set. Is there a chance that it is overridden somewhere elase?
:rjs
On Wed, May 22, 2019 at 1:28 PM Greg Wilson-Lindberg <[email protected]<mailto:[email protected]>> wrote:
Rudolf,
Here is the first half of the file, the whole file is over the 500k limit of free pastebin:
And here is the 2nd half of the file:
Greg
________________________________
From: Rudolf Streif <[email protected]<mailto:[email protected]>>
Sent: Wednesday, May 22, 2019 12:42:40 PM
To: Greg Wilson-Lindberg
Cc: Yocto list discussion
Subject: Re: [yocto] problem adding a user
Greg,
Can you share the logfile via Pastebin?
:rjs
On Tue, May 21, 2019 at 11:09 AM Greg Wilson-Lindberg <[email protected]<mailto:[email protected]>> wrote:
Rudolf,
Something else is happening to me. I changed to this in the image recipe:
SAKURA_USER = "sakura"
SAKURA_PASSWD = "Distracted"SAKURA_PASS = "$1$QVO3K6Ii$fvkoDKnlzz3d5uVoL7KcM0"
EXTRA_USERS_PARAMS = "\
usermod -p '${SAKURA_PASS}' ${SAKURA_USER}; \
usermod -a -G sudo,dialout ${SAKURA_USER}; \
"deleting all of the commented out lines, and I get this in the log file:
..../scribe/1.0-r0/rootfs -p '' sakura]
nothing between the single quotes. It's acting like SAKURA_PASS is not defined.
This is only happening when I'm trying the MD5 password.
Greg
________________________________
From: Rudolf Streif <[email protected]<mailto:[email protected]>>
Sent: Tuesday, May 21, 2019 5:37:23 AM
To: Greg Wilson-Lindberg
Cc: Yocto list discussion
Subject: Re: [yocto] problem adding a user
Greg,
usermod does not work for the MD5 algorithm with the explicit password hash as it contains the $ field delimiters which are interpreted by the shell executing the usermod command. Use single quotes around the password hash:
usermod -p '${SAKURA_PASS}' ${SAKURA_USER};
:rjs
On Mon, May 20, 2019, 11:55 Greg Wilson-Lindberg <[email protected]<mailto:[email protected]>> wrote:
Hi Rudolf,
I've had more time to work with this and I'm still having problems getting everything to work properly. I've attached the image recipe recipe that I'm using so I don't leave any thing out that may be relevant.
When I build with a password that is no more more than 8 characters long and no non-alphabetic characters:
SAKURA_PASSWD = "Distract"SAKURA_PASS = "WRsDFfg1BsrDM"
everything works correctly.
I first tried that using the openssl ... form, and then I tried the -1, MD5 BSD form and had problems, so I changed to doing the openssl on the command line and making sure that I don't have any characters that display as '.' or '/'. Again, if I don't do more than 8 characters and no special characters everything works.
When I changed to using 'Ds$tr@ct' it stopped working. The build finishes and the log file shows the usermod being exectued correctly:
NOTE: scribe: Performing usermod with [-R /home/gwilson/Qt/Qt-5.12.3/Yocto-build-RPi3/build-raspberrypi3/tmp/work/raspberrypi3-poky-linux-gnueabi/scribe/1.0-r0/rootfs -p kyNsrvS0elMWU sakura]
NOTE: scribe: Performing usermod with [-R /home/gwilson/Qt/Qt-5.12.3/Yocto-build-RPi3/build-raspberrypi3/tmp/work/raspberrypi3-poky-linux-gnueabi/scribe/1.0-r0/rootfs -a -G sudo,dialout sakura]
But when I try to sign in it doesn't work.
I then tried the 10 character password 'Distracted', the build fails:
NOTE: scribe: Performing usermod with [-R /home/gwilson/Qt/Qt-5.12.3/Yocto-build-RPi3/build-raspberrypi3/tmp/work/raspberrypi3-poky-linux-gnueabi/scribe/1.0-r0/rootfs -p sakura]
Usage: usermod [options] LOGIN
Options:
-c, --comment COMMENT new value of the GECOS field
-d, --home HOME_DIR new home directory for the user account
-e, --expiredate EXPIRE_DATE set account expiration date to EXPIRE_DATE
-f, --inactive INACTIVE set password inactive after expiration
to INACTIVE
-g, --gid GROUP force use GROUP as new primary group
-G, --groups GROUPS new list of supplementary GROUPS
-a, --append append the user to the supplemental GROUPS
mentioned by the -G option without removing
him/her from other groups
-h, --help display this help message and exit
-l, --login NEW_LOGIN new value of the login name
-L, --lock lock the user account
-m, --move-home move contents of the home directory to the
new location (use only with -d)
-o, --non-unique allow using duplicate (non-unique) UID
-p, --password PASSWORD use encrypted password for the new password
-P, --clear-password PASSWORD use clear password for the new password
-R, --root CHROOT_DIR directory to chroot into
-s, --shell SHELL new login shell for the user account
-u, --uid UID new UID for the user account
-U, --unlock unlock the user account
-v, --add-subuids FIRST-LAST add range of subordinate uids
-V, --del-subuids FIRST-LAST remove range of subordinate uids
-w, --add-subgids FIRST-LAST add range of subordinate gids
-W, --del-subgids FIRST-LAST remove range of subordinate gidsERROR: scribe: usermod command did not succeed.
So, even though I'm putting in the openssl output:
openssl passwd -1 "Distracted" $1$QVO3K6Ii$fvkoDKnlzz3d5uVoL7KcM0
that I get back from what should be a valid run of openssl, I don't see anything from the password on the usermod command line:
"...linux-gnueabi/scribe/1.0-r0/rootfs -p sakura]"
I don't understand why the short passwords and passing along the proper hash works, but not the longer password.
It also doesn't make sense that I can't put in the '$' & '@' characters and have them work.
Any suggestions would be greatly appreciated.
Greg
________________________________
From: Rudolf Streif <[email protected]<mailto:[email protected]>>
Sent: Wednesday, May 15, 2019 4:58:26 PM
To: Greg Wilson-Lindberg
Cc: Yocto list discussion
Subject: Re: [yocto] problem adding a user
Glad to hear that it works now. I am planning on attending the YP DevDay.
:rjs
On Wed, May 15, 2019, 13:53 Greg Wilson-Lindberg <[email protected]<mailto:[email protected]>> wrote:
Thank you very much, that got me back on the right path.
Maybe I'll see you at the Yocto day at the Embedded Linux Conference.
Regards,
Greg Wilson-Lindberg
Principal Firmware Engineer | Sakura Finetek USA, Inc.
1750 W 214<https://maps.google.com/?q=1750+W+214&entry=gmail&source=g>th Street | Torrance, CA 90501 | U.S.A.
T: +1 310 783 5075
F: +1 310 618 6902 | E: [email protected]<mailto:[email protected]>
www.sakuraus.com<http://www.sakuraus.com>
[cid:[email protected]]
[cid:[email protected]]
________________________________
Confidentiality Notice: This e-mail transmission may contain confidential or legally privileged information that is intended only for the individual or entity named in the e-mail address. If you are not the intended recipient, you are hereby notified that any disclosure, copying, distribution, or reliance upon the contents of this e-mail is strictly prohibited. If you have received this e-mail transmission in error, please reply to the sender, so that Sakura Finetek USA, Inc. can arrange for proper delivery, and then please delete the message from your inbox. Thank you.
From: Rudolf J Streif [mailto:[email protected]<mailto:[email protected]>]
Sent: Wednesday, May 15, 2019 01:30 PM
To: Greg Wilson-Lindberg <[email protected]<mailto:[email protected]>>; Yocto list discussion <[email protected]<mailto:[email protected]>>
Subject: Re: [yocto] problem adding a user
Instead of
useradd -p openssl passwd test sakura
which attempts to add the user and set the password which fails if the user already exists, use
usermod -p openssl passwd test sakura
which sets the user's password.
:rjs
On 5/15/19 1:18 PM, Greg Wilson-Lindberg wrote:
Ok, I had been using the useradd class in a couple of other recipes to allow me to copy files to the sakura user directory and another location, but owned by sakura. That seems to have been what was causing the problem.
I had been using the extrausers class in my top level image recipe.
So now how do I get all of this to work together? Do I need to put everything that touches the sakura user in the same recipe? It seems that I need to use only one of the useradd or extrausers classes?
Greg
________________________________
From: Rudolf J Streif <[email protected]><mailto:[email protected]>
Sent: Wednesday, May 15, 2019 12:31 PM
To: Greg Wilson-Lindberg; Yocto list discussion
Subject: Re: [yocto] problem adding a user
The ! for the password in /etc/shadow indicates that the account is disabled:
sakura:!:18031:0:99999:7:::
Either there is something wrong with the password generation or it gets disabled by something else. Maybe it's worth trying with a plain image without Boot2Qt or anything else.
:rjs
On 5/15/19 11:46 AM, Greg Wilson-Lindberg wrote:
Hi Rudolf,
1st, yes I inherit extrausers. Attached are the passwd & shadow files.
It shouldn't make any difference, but I'm building this for an RPi3 using the Qt Boot2Qt version of the Yocto environment, distro 2.5.3.
Greg
________________________________
From: Rudolf J Streif <[email protected]><mailto:[email protected]>
Sent: Wednesday, May 15, 2019 11:26 AM
To: Greg Wilson-Lindberg; Yocto list discussion
Subject: Re: [yocto] problem adding a user
Hi Greg,
Quoted 1 line
I've also tried both the back-quote and the single-quote, no difference.
Help me to understand this. the back-quotes are the right ones. If you use the single ones your password in the /etc/shadow ends up being 'openssl passwd test' (without the quotes), unless the build fails because of a parsing error (I have not tried it). Silly question, you did inherit extrausers class?
Can you post your /etc/passwd and /etc/shadow
I am surprised that this does not work with your setup. I have been doing this a gazillion times always with success.
:rjs
On 5/15/19 11:03 AM, Greg Wilson-Lindberg wrote:
Hi Rudolf,
Thanks for the reply, and the information on how openssl works.
I'm trying to create a user with the same group name so the code that I'm using reduces to:
EXTRA_USERS_PARAMS = "\
useradd -p `openssl passwd test` sakura; \
usermod -a -G sudo ${SAKURA_USER}; \
"I also, as you can see, removed the macros to eliminate as much confusion as possible.
I still can't login in using the password 'test'.
I've also tried both the back-quote and the single-quote, no difference.
Regards,
Greg
________________________________
From: Rudolf J Streif <[email protected]><mailto:[email protected]>
Sent: Wednesday, May 15, 2019 10:07:47 AM
To: Greg Wilson-Lindberg; Yocto list discussion
Subject: Re: [yocto] problem adding a user
Hi Greg,
Well, I suppose I wrote the book you are referring to...
Using
useradd -p PASSWORD USER
takes the password hash for PASSWORD hence the use of openssl in:
useadd -p openssl passwd PASSWORD USER
openssl password creates the password hash using the original crypt hash algorithm if no other options are specified. e.g.
$ openssl passwd hello 6hEsTksgRkeiI
With this the first two characters of the output is the salt and the rest is the password hash. If you want openssl to create the same result again:
$ openssl passwd -salt "6h" hello 6hEsTksgRkeiI
You can use newer algorithms like MD5 based BSD password algorithm 1:
$ openssl passwd -1 hello $1$4Mu8Fcs.$eIKgPP7RCYrb3lFZjhADA1
$1 : password algorithm 1
$4Mu8Fcs. : salt
$eIKgPP7RCYrb3lFZjhADA1 : password hash
If you log into the system you have to use the clear password. The system reads the salt, creates the password hash and compares the results.
:rjs
Quoted 8 lines · Greg Wilson-Lindberg
I'm trying to use the example in "Embedded Linux Systems with the Yocto Project" to add a user to my Yocto build. In the book the sample code:
useradd -p `openssl passwd ${DEV_PASSWORD}` developer; \uses openssl to generate the encrypted password string to pass to useradd. I have never been able to get this to work. When I run the openssl command on the cmd line I get a different value every time, this seems wrong, How can the password code compare against it if every encode produces a different value?
Quoted 7 lines
I am getting the user added to the system, the home directory shows up and the user is in the passwd and group files. I just can't login to the account.
I've obviously got something confused, any help would be appreciated.
Greg Wilson-Lindberg
--
-----
Rudolf J Streif
CEO/CTO ibeeto
+1.855.442.3396 x700
--
-----
Rudolf J Streif
CEO/CTO ibeeto
+1.855.442.3396 x700
--
-----
Rudolf J Streif
CEO/CTO ibeeto
+1.855.442.3396 x700
--
-----
Rudolf J Streif
CEO/CTO ibeeto
+1.855.442.3396 x700
--
Rudolf J Streif
CEO/CTO
ibeeto, Streif Enterprises Inc.
--
Rudolf J Streif
CEO/CTO
ibeeto, Streif Enterprises Inc.
--
_______________________________________________
yocto mailing list [email protected]<mailto:[email protected]>
https://lists.yoctoproject.org/listinfo/yocto
--
Leon Woestenberg [email protected]<mailto:[email protected]>
T: +31 40 711 42 76
M: +31 6 472 30 372
Sidebranch
Embedded Systems
Eindhoven, The Netherlands
http://www.sidebranch.com<http://www.sidebranch.com/>
[http://www.sidebranch.nl/sites/default/files/images/unnamed.png]
Quoted 20 lines · Rudolf Streif
Greg,
It eluded me earlier but in both instances the variable containing the password does not seem to be expanded.
First version without the single quotes:
SAKURA_PASS= "$1$QVO3K6Ii$fvkoDKnlzz3d5uVoL7KcM0"
EXTRA_USERS_PARAMS= "\
usermod -p ${SAKURA_PASS} ${SAKURA_USER}; \
usermod -a -G sudo,dialout ${SAKURA_USER}; \
"
results in:NOTE: scribe: Performing usermod with [-R
/home/gwilson/Qt/Qt-5.12.3/Yocto-build-RPi3/build-raspberrypi3/tmp/work/raspberrypi3-poky-linux-gnueabi/scribe/1.0-r0/rootfs-p sakura]and with the quotes:
SAKURA_PASS= "$1$QVO3K6Ii$fvkoDKnlzz3d5uVoL7KcM0"
Quoted 9 lines
EXTRA_USERS_PARAMS= "\
usermod -p '${SAKURA_PASS}' ${SAKURA_USER}; \
usermod -a -G sudo,dialout ${SAKURA_USER}; \
"
results in:
NOTE: scribe: Performing usermod with [-R/home/gwilson/Qt/Qt-5.12.3/Yocto-build-RPi3/build-raspberrypi3/tmp/work/raspberrypi3-poky-linux-gnueabi/scribe/1.0-r0/rootfs-p '' sakura]It looks as if the variable
SAKURA_PASSis not set at all. I looked at your scribe.bb <http://scribe.bb> recipe you attached earlier but I could not find any reason why the variable is not set. Is there a chance that it is overridden somewhere elase?
This is correct with one small nit that we need to escape some characters which has special meaning for shell. e.g. $
e.g. in local.conf something like below
INHERIT += "extrausers"
EXTRA_USERS_PARAMS += "\
useradd sakura; \
usermod -p '\$1\$QVO3K6Ii\$fvkoDKnlzz3d5uVoL7KcM0' sakura; \"
might work as you expect.
Quoted 555 lines
:rjs
On Wed, May 22, 2019 at 1:28 PM Greg Wilson-Lindberg <[email protected] <mailto:[email protected]>> wrote:
Rudolf,
Here is the first half of the file, the whole file is over the 500k limit of free pastebin:
And here is the 2nd half of the file:
Greg
------------------------------------------------------------------------
*From:* Rudolf Streif <[email protected] <mailto:[email protected]>> *Sent:* Wednesday, May 22, 2019 12:42:40 PM *To:* Greg Wilson-Lindberg
*Cc:* Yocto list discussion
*Subject:* Re: [yocto] problem adding a user Greg,
Can you share the logfile via Pastebin? :rjsOn Tue, May 21, 2019 at 11:09 AM Greg Wilson-Lindberg <[email protected] <mailto:[email protected]>> wrote:
Rudolf,
Something else is happening to me. I changed to this in the image recipe:
SAKURA_USER= "sakura"
SAKURA_PASSWD= "Distracted"
SAKURA_PASS= "$1$QVO3K6Ii$fvkoDKnlzz3d5uVoL7KcM0"
EXTRA_USERS_PARAMS= "\
usermod -p '${SAKURA_PASS}' ${SAKURA_USER}; \
usermod -a -G sudo,dialout ${SAKURA_USER}; \
"deleting all of the commented out lines, and I get this in the log file:
..../scribe/1.0-r0/rootfs -p '' sakura]
nothing between the single quotes. It's acting like
SAKURA_PASSis not defined.This is only happening when I'm trying the MD5 password.
Greg
------------------------------------------------------------------------
*From:* Rudolf Streif <[email protected] <mailto:[email protected]>> *Sent:* Tuesday, May 21, 2019 5:37:23 AM *To:* Greg Wilson-Lindberg
*Cc:* Yocto list discussion
*Subject:* Re: [yocto] problem adding a user Greg,usermod does not work for the MD5 algorithm with the explicit password hash as it contains the $ field delimiters which are interpreted by the shell executing the usermod command. Use single quotes around the password hash:
usermod -p '${SAKURA_PASS}' ${SAKURA_USER};
:rjs
On Mon, May 20, 2019, 11:55 Greg Wilson-Lindberg <[email protected] <mailto:[email protected]>> wrote:
Hi Rudolf,
I've had more time to work with this and I'm still having problems getting everything to work properly. I've attached the image recipe recipe that I'm using so I don't leave any thing out that may be relevant.
When I build with a password that is no more more than 8 characters long and no non-alphabetic characters:
SAKURA_PASSWD= "Distract"
SAKURA_PASS= "WRsDFfg1BsrDM"everything works correctly.
I first tried that using the
openssl ...form, and then I tried the -1, MD5 BSD form and had problems, so I changed to doing the openssl on the command line and making sure that I don't have any characters that display as '.' or '/'. Again, if I don't do more than 8 characters and no special characters everything works.When I changed to using 'Ds$tr@ct' it stopped working. The build finishes and the log file shows the usermod being exectued correctly:
NOTE: scribe: Performing usermod with [-R
/home/gwilson/Qt/Qt-5.12.3/Yocto-build-RPi3/build-raspberrypi3/tmp/work/raspberrypi3-poky-linux-gnueabi/scribe/1.0-r0/rootfs-p kyNsrvS0elMWU sakura]
NOTE: scribe: Performing usermod with [-R/home/gwilson/Qt/Qt-5.12.3/Yocto-build-RPi3/build-raspberrypi3/tmp/work/raspberrypi3-poky-linux-gnueabi/scribe/1.0-r0/rootfs-a -G sudo,dialout sakura]But when I try to sign in it doesn't work.
I then tried the 10 character password 'Distracted', the build fails:
NOTE: scribe: Performing usermod with [-R
/home/gwilson/Qt/Qt-5.12.3/Yocto-build-RPi3/build-raspberrypi3/tmp/work/raspberrypi3-poky-linux-gnueabi/scribe/1.0-r0/rootfs-p sakura]
Usage: usermod [options] LOGINOptions:
-c, --comment COMMENT new value of the GECOS field
-d, --homeHOME_DIRnew home directory for the user account
-e, --expiredateEXPIRE_DATEset account expiration date toEXPIRE_DATE
-f, --inactive INACTIVE set password inactive after expiration
to INACTIVE
-g, --gid GROUP force use GROUP as new primary group
-G, --groups GROUPS new list of supplementary GROUPS
-a, --append append the user to the supplemental GROUPS
mentioned by the -G option without removing him/her from other groups
-h, --help display this help message and exit
-l, --loginNEW_LOGINnew value of the login name
-L, --lock lock the user account
-m, --move-home move contents of the home directory to the
new location (use only with -d)
-o, --non-unique allow using duplicate (non-unique) UID
-p, --password PASSWORD use encrypted password for the new password
-P, --clear-password PASSWORD use clear password for the new password
-R, --rootCHROOT_DIRdirectory to chroot into
-s, --shell SHELL new login shell for the user account
-u, --uid UID new UID for the user account
-U, --unlock unlock the user account
-v, --add-subuids FIRST-LAST add range of subordinate uids -V, --del-subuids FIRST-LAST remove range of subordinate uids -w, --add-subgids FIRST-LAST add range of subordinate gids -W, --del-subgids FIRST-LAST remove range of subordinate gidsERROR: scribe: usermod command did not succeed.
So, even though I'm putting in the openssl output:
openssl passwd -1 "Distracted" $1$QVO3K6Ii$fvkoDKnlzz3d5uVoL7KcM0that I get back from what should be a valid run of openssl, I don't see anything from the password on the usermod command line:
"...linux-gnueabi/scribe/1.0-r0/rootfs -p sakura]"I don't understand why the short passwords and passing along the proper hash works, but not the longer password.
It also doesn't make sense that I can't put in the '$' & '@' characters and have them work.
Any suggestions would be greatly appreciated.
Greg
------------------------------------------------------------------------
*From:* Rudolf Streif <[email protected] <mailto:[email protected]>>
*Sent:* Wednesday, May 15, 2019 4:58:26 PM *To:* Greg Wilson-Lindberg
*Cc:* Yocto list discussion
*Subject:* Re: [yocto] problem adding a user Glad to hear that it works now. I am planning on attending the YP DevDay.:rjs
On Wed, May 15, 2019, 13:53 Greg Wilson-Lindberg <[email protected] <mailto:[email protected]>> wrote:
Thank you very much, that got me back on the right path.____
Maybe I'll see you at the Yocto day at the Embedded Linux Conference.____
Regards,____
cid:[email protected]____
*Greg Wilson-Lindberg ____*
*Principal Firmware Engineer | Sakura Finetek USA, Inc.
____**____*
1750 W 214^th Street | Torrance, CA 90501 | U.S.A. ____
T: +1 310 783 5075 ____
F: +1 310 618 6902 | E: [email protected] <mailto:[email protected]>____
www.sakuraus.com <http://www.sakuraus.com>____
____
cid:[email protected]____
cid:[email protected]____
------------------------------------------------------------------------
Confidentiality Notice: This e-mail transmission may contain confidential or legally privileged information that is intended only for the individual or entity named in the e-mail address. If you are not the intended recipient, you are hereby notified that any disclosure, copying, distribution, or reliance upon the contents of this e-mail is strictly prohibited. If you have received this e-mail transmission in error, please reply to the sender, so that Sakura Finetek USA, Inc. can arrange for proper delivery, and then please delete the message from your inbox. Thank you.____
__ __
__ __
*From:*Rudolf J Streif [mailto:[email protected] <mailto:[email protected]>]
*Sent:* Wednesday, May 15, 2019 01:30 PM *To:* Greg Wilson-Lindberg <[email protected] <mailto:[email protected]>>; Yocto list discussion <[email protected] <mailto:[email protected]>> *Subject:* Re: [yocto] problem adding auser______ __
Instead
of______ __
useradd -p
openssl passwd testsakura______ __
which attempts to add the user and set the password which fails if the user already exists,
use______ __
usermod -p
openssl passwd testsakura______ __
which sets the user's password.____
__ __
:rjs____
__ __
On 5/15/19 1:18 PM, Greg Wilson-Lindberg wrote:____
Ok, I had been using the useradd class in a couple of other recipes to allow me to copy files to the sakura user directory and another location, but owned by sakura. That seems to have been what was causing the problem.____
__ __
I had been using the extrausers class in my top level image recipe.____
So now how do I get all of this to work together? Do I need to put everything that touches the sakura user in the same recipe? It seems that I need to use only one of the useradd or extrausers classes?____
__ __
Greg____------------------------------------------------------------------------
*From:*Rudolf J Streif <[email protected]> <mailto:[email protected]> *Sent:* Wednesday, May 15, 2019 12:31 PM *To:* Greg Wilson-Lindberg; Yocto list discussion *Subject:* Re: [yocto] problem adding a
user________
The ! for the password in
/etc/shadowindicates that the account is disabled:____sakura:!:18031:0:99999:7:::____
__ __
Either there is something wrong with the password generation or it gets disabled by something else. Maybe it's worth trying with a plain image without Boot2Qt or anything else.____
__ __
:rjs____
__ __
__ __
On 5/15/19 11:46 AM, Greg Wilson-Lindberg wrote:____
Hi Rudolf,____
1st, yes I inherit extrausers. Attached are the passwd & shadow files.____
__ __
It shouldn't make any difference, but I'm building this for an RPi3 using the Qt Boot2Qt version of the Yocto environment, distro 2.5.3.____
__ __
Greg____------------------------------------------------------------------------
*From:*Rudolf J Streif <[email protected]> <mailto:[email protected]> *Sent:* Wednesday, May 15, 2019 11:26 AM *To:* Greg Wilson-Lindberg; Yocto list discussion *Subject:* Re: [yocto] problem adding a
user________
Hi Greg,____
__ __
> I've also tried both the back-quote and the single-quote, no difference.____
__ __
Help me to understand this. the back-quotes are the right ones. If you use the single ones your password in the
/etc/shadowends up being 'openssl passwd test' (without the quotes), unless the build fails because of a parsing error (I have not tried it). Silly question, you did inherit extrausers class?______ __
Can you post your
/etc/passwdand/etc/shadow______ __
I am surprised that this does not work with your setup. I have been doing this a gazillion times always with success.____
__ __
:rjs____
__ __
__ __
__ __
On 5/15/19 11:03 AM, Greg Wilson-Lindberg wrote:____
Hi Rudolf,____
Thanks for the reply, and the information on how openssl works.____
__ __
I'm trying to create a user with the same group name so the code that I'm using reduces to:____
EXTRA_USERS_PARAMS= "\____useradd -p
openssl passwd testsakura; \____usermod -a -G sudo ${SAKURA_USER}; \____
"____
I also, as you can see, removed the macros to eliminate as much confusion as possible. ____
__ __
I still can't login in using the password 'test'.____
__ __
I've also tried both the back-quote and the single-quote, no difference.____
Regards,____
__ __
Greg____------------------------------------------------------------------------
*From:*Rudolf J Streif <[email protected]> <mailto:[email protected]> *Sent:* Wednesday, May 15, 2019 10:07:47 AM *To:* Greg Wilson-Lindberg; Yocto list discussion
*Subject:* Re: [yocto] problem adding auser________
Hi Greg,
Well, I suppose I wrote the book you are referring to...
Using
useradd -p PASSWORD USER
takes the password hash for PASSWORD hence the use of openssl in:
useadd -p
openssl passwd PASSWORDUSERopenssl password creates the password hash using the original crypt hash algorithm if no other options are specified. e.g.
$ openssl passwd hello 6hEsTksgRkeiI
With this the first two characters of the output is the salt and the rest is the password hash. If you want openssl to create the same result again:
$ openssl passwd -salt "6h" hello 6hEsTksgRkeiI
You can use newer algorithms like MD5 based BSD password algorithm 1:
$ openssl passwd -1 hello $1$4Mu8Fcs.$eIKgPP7RCYrb3lFZjhADA1
$1 : password algorithm 1 $4Mu8Fcs. : salt $eIKgPP7RCYrb3lFZjhADA1 : password hash
If you log into the system you have to use the clear password. The
system reads the salt, creates the password hash and compares the results.:rjs
On 5/14/19 5:34 PM, Greg Wilson-Lindberg wrote:
> I'm trying to use the example in "Embedded Linux Systems with the Yocto Project" to add a user to my Yocto build. In the book the sample code:
>
> useradd -popenssl passwd ${DEV_PASSWORD}developer; \
>
> uses openssl to generate the encrypted password string to pass to useradd. I have never been able to get this to work. When I run the openssl > command on the cmd line I get a different value every time, this seems wrong, How can the password code compare against it if every encode > produces a different value?
>
> I am getting the user added to the system, the home directory shows up and the user is in the passwd and group files. I just can't login to the > account.
>
> I've obviously got something confused, any help would be appreciated.
>
> Greg Wilson-Lindberg
>--
-----
Rudolf J Streif CEO/CTO ibeeto +1.855.442.3396x700____-- ____
-----____
Rudolf J
Streif____CEO/CTO
ibeeto____+1.855.442.3396
x700____-- ____
-----____
Rudolf J
Streif____CEO/CTO
ibeeto____+1.855.442.3396
x700____-- ____
-----____
Rudolf J
Streif____CEO/CTO
ibeeto____+1.855.442.3396
x700____--
Rudolf J Streif
CEO/CTO
ibeeto, Streif Enterprises Inc.Signature · 3 lines
Rudolf J Streif CEO/CTO ibeeto, Streif Enterprises Inc.
Hi Khem,
Quoted 55 lines
-----Original Message-----
From: Khem Raj [mailto:[email protected]]
Sent: Thursday, May 23, 2019 07:11 PM
To: Rudolf Streif <[email protected]>; Greg Wilson-Lindberg <[email protected]>
Cc: Yocto list discussion <[email protected]>
Subject: Re: [yocto] problem adding a userQuoted 32 lines · Rudolf Streif
Greg,
It eluded me earlier but in both instances the variable containing the password does not seem to be expanded.
First version without the single quotes:
SAKURA_PASS= "$1$QVO3K6Ii$fvkoDKnlzz3d5uVoL7KcM0"
EXTRA_USERS_PARAMS= "\
usermod -p ${SAKURA_PASS} ${SAKURA_USER}; \
usermod -a -G sudo,dialout ${SAKURA_USER}; \
"
results in:NOTE: scribe: Performing usermod with [-R
/home/gwilson/Qt/Qt-5.12.3/Yocto-build-RPi3/build-raspberrypi3/tmp/work/raspberrypi3-poky-linux-gnueabi/scribe/1.0-r0/rootfs -p sakura]and with the quotes:
SAKURA_PASS= "$1$QVO3K6Ii$fvkoDKnlzz3d5uVoL7KcM0"
EXTRA_USERS_PARAMS= "\
usermod -p '${SAKURA_PASS}' ${SAKURA_USER}; \
usermod -a -G sudo,dialout ${SAKURA_USER}; \
"
results in:
NOTE: scribe: Performing usermod with [-R/home/gwilson/Qt/Qt-5.12.3/Yocto-build-RPi3/build-raspberrypi3/tmp/work/raspberrypi3-poky-linux-gnueabi/scribe/1.0-r0/rootfs -p '' sakura]Quoted 5 lines
It looks as if the variable
SAKURA_PASSis not set at all. I looked at your scribe.bb <http://scribe.bb> recipe you attached earlier but I could not find any reason why the variable is not set. Is there a chance that it is overridden somewhere elase?This is correct with one small nit that we need to escape some characters which has special meaning for shell. e.g. $
e.g. in local.conf something like below
Quoted 7 lines
INHERIT += "extrausers"
EXTRA_USERS_PARAMS += "\ useradd sakura; \ usermod -p '\$1\$QVO3K6Ii\$fvkoDKnlzz3d5uVoL7KcM0' sakura; \ "might work as you expect.
This does leave the hash in the usermod command line finally.
So it is possible to pass MD5 hashes through if the '$' are escaped. I can't use non-alphabetic characters, i.e replace 's' with '$', and 'a' with '@', I can't login with those changes. But MD5 hashes of alphabetic only passwords work for the cases that I have tested. I can also pass the escaped hash in to usermod as a macro.
It looks like I've got something that I can work with.
Thanks to all for the help that you have so kindly given,
Greg
Quoted 597 lines
Quoted 107 lines
:rjs
On Wed, May 22, 2019 at 1:28 PM Greg Wilson-Lindberg <[email protected] <mailto:[email protected]>> wrote:
Rudolf,
Here is the first half of the file, the whole file is over the 500k limit of free pastebin:
And here is the 2nd half of the file:
Greg
------------------------------------------------------------------------
*From:* Rudolf Streif <[email protected] <mailto:[email protected]>> *Sent:* Wednesday, May 22, 2019 12:42:40 PM *To:* Greg Wilson-Lindberg
*Cc:* Yocto list discussion
*Subject:* Re: [yocto] problem adding a user Greg,
Can you share the logfile via Pastebin? :rjsOn Tue, May 21, 2019 at 11:09 AM Greg Wilson-Lindberg <[email protected] <mailto:[email protected]>> wrote:
Rudolf,
Something else is happening to me. I changed to this in the image recipe:
SAKURA_USER= "sakura"
SAKURA_PASSWD= "Distracted"
SAKURA_PASS= "$1$QVO3K6Ii$fvkoDKnlzz3d5uVoL7KcM0"
EXTRA_USERS_PARAMS= "\
usermod -p '${SAKURA_PASS}' ${SAKURA_USER}; \
usermod -a -G sudo,dialout ${SAKURA_USER}; \
"deleting all of the commented out lines, and I get this in the log file:
..../scribe/1.0-r0/rootfs -p '' sakura]
nothing between the single quotes. It's acting like
SAKURA_PASSis not defined.This is only happening when I'm trying the MD5 password.
Greg
------------------------------------------------------------------------
*From:* Rudolf Streif <[email protected] <mailto:[email protected]>> *Sent:* Tuesday, May 21, 2019 5:37:23 AM *To:* Greg Wilson-Lindberg
*Cc:* Yocto list discussion
*Subject:* Re: [yocto] problem adding a user Greg,usermod does not work for the MD5 algorithm with the explicit password hash as it contains the $ field delimiters which are interpreted by the shell executing the usermod command. Use single quotes around the password hash:
usermod -p '${SAKURA_PASS}' ${SAKURA_USER};
:rjs
On Mon, May 20, 2019, 11:55 Greg Wilson-Lindberg <[email protected] <mailto:[email protected]>> wrote:
Hi Rudolf,
I've had more time to work with this and I'm still having problems getting everything to work properly. I've attached the image recipe recipe that I'm using so I don't leave any thing out that may be relevant.
When I build with a password that is no more more than 8 characters long and no non-alphabetic characters:
SAKURA_PASSWD= "Distract"
SAKURA_PASS= "WRsDFfg1BsrDM"everything works correctly.
I first tried that using the
openssl ...form, and then I tried the -1, MD5 BSD form and had problems, so I changed to doing the openssl on the command line and making sure that I don't have any characters that display as '.' or '/'. Again, if I don't do more than 8 characters and no special characters everything works.Quoted 4 lines
When I changed to using 'Ds$tr@ct' it stopped working. The build finishes and the log file shows the usermod being exectued correctly:
NOTE: scribe: Performing usermod with [-R
/home/gwilson/Qt/Qt-5.12.3/Yocto-build-RPi3/build-raspberrypi3/tmp/work/raspberrypi3-poky-linux- gnueabi/scribe/1.0-r0/rootfs -p kyNsrvS0elMWU sakura]
Quoted 10 lines
NOTE: scribe: Performing usermod with [-R
/home/gwilson/Qt/Qt-5.12.3/Yocto-build-RPi3/build-raspberrypi3/tmp/work/raspberrypi3-poky-linux-gnueabi/scribe/1.0-r0/rootfs -a -G sudo,dialout sakura]But when I try to sign in it doesn't work.
I then tried the 10 character password 'Distracted', the build fails:
NOTE: scribe: Performing usermod with [-R
/home/gwilson/Qt/Qt-5.12.3/Yocto-build-RPi3/build-raspberrypi3/tmp/work/raspberrypi3-poky-linux- gnueabi/scribe/1.0-r0/rootfs -p sakura]
Quoted 6 lines
Usage: usermod [options] LOGIN
Options:
-c, --comment COMMENT new value of the GECOS field
-d, --homeHOME_DIRnew home directory for the user account
-e, --expiredateEXPIRE_DATEset account expiration date to
EXPIRE_DATEQuoted 6 lines
-f, --inactive INACTIVE set password inactive after expiration
to INACTIVE
-g, --gid GROUP force use GROUP as new primary group
-G, --groups GROUPS new list of supplementary GROUPS
-a, --append append the user to the supplemental GROUPS
mentioned by the -G option without removingQuoted 8 lines
him/her from other groups
-h, --help display this help message and exit
-l, --loginNEW_LOGINnew value of the login name
-L, --lock lock the user account
-m, --move-home move contents of the home directory to the
new location (use only with -d)
-o, --non-unique allow using duplicate (non-unique) UID
-p, --password PASSWORD use encrypted password for the newpassword
Quoted 1 line
-P, --clear-password PASSWORD use clear password for the new
password
Quoted 10 lines
-R, --root CHROOT_DIR directory to chroot into -s, --shell SHELL new login shell for the user account -u, --uid UID new UID for the user account -U, --unlock unlock the user account -v, --add-subuids FIRST-LAST add range of subordinate uids -V, --del-subuids FIRST-LAST remove range of subordinate uids -w, --add-subgids FIRST-LAST add range of subordinate gids -W, --del-subgids FIRST-LAST remove range ofsubordinate gids
Quoted 7 lines
ERROR: scribe: usermod command did not succeed.
So, even though I'm putting in the openssl output:
openssl passwd -1 "Distracted" $1$QVO3K6Ii$fvkoDKnlzz3d5uVoL7KcM0that I get back from what should be a valid run of openssl, I don't see
anything
Quoted 4 lines
from the password on the usermod command line:
"...linux-gnueabi/scribe/1.0-r0/rootfs -p sakura]"I don't understand why the short passwords and passing along the proper
hash works,
Quoted 348 lines
but not the longer password.
It also doesn't make sense that I can't put in the '$' & '@' characters and have them work.
Any suggestions would be greatly appreciated.
Greg
------------------------------------------------------------------------
*From:* Rudolf Streif <[email protected] <mailto:[email protected]>>
*Sent:* Wednesday, May 15, 2019 4:58:26 PM *To:* Greg Wilson-Lindberg
*Cc:* Yocto list discussion
*Subject:* Re: [yocto] problem adding a user Glad to hear that it works now. I am planning on attending the YP DevDay.:rjs
On Wed, May 15, 2019, 13:53 Greg Wilson-Lindberg <[email protected] <mailto:[email protected]>> wrote:
Thank you very much, that got me back on the right
path.____Maybe I'll see you at the Yocto day at the Embedded Linux Conference.____ Regards,____ cid:[email protected]____ *Greg Wilson-Lindberg ____* *Principal Firmware Engineer | Sakura Finetek USA, Inc. ____* *____* 1750 W 214^th Street | Torrance, CA 90501 | U.S.A.____
T: +1 310 783 5075 ____ F: +1 310 618 6902 | E: [email protected] <mailto:[email protected]>____ www.sakuraus.com <http://www.sakuraus.com>____ ____ cid:[email protected]____ cid:[email protected]____----------------------------------------------------------------------
--Confidentiality Notice: This e-mail transmission may contain confidential or legally privileged information that is intended only for the individual or entity named in the e-mail address. If you are not the intended recipient, you are hereby notified that any disclosure, copying, distribution, or reliance upon the contents of this e-mail is strictly prohibited. If you have received this e-mail transmission in error, please reply to the sender, so that Sakura Finetek USA, Inc. can arrange for proper delivery, and then please delete the message from your inbox. Thank you.____
__ __
__ __
*From:*Rudolf J Streif [mailto:[email protected] <mailto:[email protected]>]
*Sent:* Wednesday, May 15, 2019 01:30 PM *To:* Greg Wilson-Lindberg <[email protected] <mailto:[email protected]>>; Yocto list discussion <[email protected] <mailto:[email protected]>> *Subject:* Re: [yocto] problem adding auser______ __
Instead
of______ __
useradd -p
openssl passwd testsakura______ __
which attempts to add the user and set the password which fails if the user already exists,
use______ __
usermod -p
openssl passwd testsakura______ __
which sets the user's password.____
__ __
:rjs____
__ __
On 5/15/19 1:18 PM, Greg Wilson-Lindberg wrote:____
Ok, I had been using the useradd class in a couple of other recipes to allow me to copy files to the sakura user directory and another location, but owned by sakura. That seems to have been what was causing the problem.____
__ __
I had been using the extrausers class in my top level image recipe.____
So now how do I get all of this to work together? Do I need to put everything that touches the sakura user in the same recipe? It seems that I need to use only one of the useradd or extrausers classes?____
__ __
Greg____----------------------------------------------------------------------
--*From:*Rudolf J Streif <[email protected]> <mailto:[email protected]> *Sent:* Wednesday, May 15, 2019 12:31 PM *To:* Greg Wilson-Lindberg; Yocto list discussion *Subject:* Re: [yocto] problem adding a
user________
The ! for the password in
/etc/shadowindicates that the account is disabled:____sakura:!:18031:0:99999:7:::____
__ __
Either there is something wrong with the password generation or it gets disabled by something else. Maybe it's worth trying with a plain image without Boot2Qt or anything else.____
__ __
:rjs____
__ __
__ __
On 5/15/19 11:46 AM, Greg Wilson-Lindberg
wrote:____Hi Rudolf,____
1st, yes I inherit extrausers. Attached are the passwd & shadow files.____
__ __
It shouldn't make any difference, but I'm building this for an RPi3 using the Qt Boot2Qt version of the Yocto environment, distro
2.5.3.______ __ Greg____----------------------------------------------------------------------
--*From:*Rudolf J Streif <[email protected]> <mailto:[email protected]> *Sent:* Wednesday, May 15, 2019 11:26 AM *To:* Greg Wilson-Lindberg; Yocto list discussion *Subject:* Re: [yocto] problem adding a
user________ Hi Greg,____ __ __ > I've also tried both the back-quote and thesingle-quote, no difference.____
__ __
Help me to understand this. the back-quotes are the right ones. If you use the single ones your password in the
/etc/shadowends up being 'openssl passwd test' (without the quotes), unless the build fails because of a parsing error (I have not tried it). Silly question, you did inherit extrausers class?______ __
Can you post your
/etc/passwdand/etc/shadow______ __ I am surprised that this does not work with your setup. I have been doing this a gazillion times always with success.____ __ __ :rjs____ __ __ __ __ __ __ On 5/15/19 11:03 AM, Greg Wilson-Lindbergwrote:____
Hi Rudolf,____
Thanks for the reply, and the information on how openssl works.____
__ __
I'm trying to create a user with the same group name so the code that I'm using reduces to:____
EXTRA_USERS_PARAMS= "\____useradd -p
openssl passwd test
sakura; \____usermod -a -G sudo ${SAKURA_USER};\____
"____
I also, as you can see, removed the macros to eliminate as much confusion as
possible. ______ __ I still can't login in using the password 'test'.____ __ __ I've also tried both the back-quote and the single-quote, no difference.____ Regards,____ __ __ Greg____----------------------------------------------------------------------
--*From:*Rudolf J Streif <[email protected]> <mailto:[email protected]> *Sent:* Wednesday, May 15, 2019 10:07:47 AM *To:* Greg Wilson-Lindberg; Yocto list discussion
*Subject:* Re: [yocto] problem adding auser________
Hi Greg,
Well, I suppose I wrote the book you are referring to...
Using
useradd -p PASSWORD USER
takes the password hash for PASSWORD hence the use of openssl in:
useadd -p
openssl passwd PASSWORDUSERopenssl password creates the password hash using the original crypt hash algorithm if no other options are specified. e.g.
$ openssl passwd hello 6hEsTksgRkeiI
With this the first two characters of the output is the salt and the rest is the password hash. If you want openssl to create the same result again:
$ openssl passwd -salt "6h" hello 6hEsTksgRkeiI
You can use newer algorithms like MD5 based BSD password algorithm 1:
$ openssl passwd -1 hello $1$4Mu8Fcs.$eIKgPP7RCYrb3lFZjhADA1
$1 : password algorithm 1 $4Mu8Fcs. : salt $eIKgPP7RCYrb3lFZjhADA1 : password hash
If you log into the system you have to use the clear password. The
system reads the salt, creates the password hash and compares the results.Quoted 5 lines
:rjs
On 5/14/19 5:34 PM, Greg Wilson-Lindberg wrote:
> I'm trying to use the example in "Embedded Linux Systemswith the Yocto Project" to add a user to my Yocto build. In the book the sample code:
Quoted 2 lines
> > useradd -p `openssl passwd ${DEV_PASSWORD}`developer; \
Quoted 2 lines
>
> uses openssl to generate the encrypted password string topass to useradd. I have never been able to get this to work. When I run the openssl
Quoted 1 line
> command on the cmd line I get a different value every time,
this seems wrong, How can the password code compare against it if every encode
Quoted 3 lines
> produces a different value?
>
> I am getting the user added to the system, the home directoryshows up and the user is in the passwd and group files. I just can't login to the
Quoted 3 lines
> account.
>
> I've obviously got something confused, any help would beappreciated.
Quoted 54 lines
> > Greg Wilson-Lindberg > -- ----- Rudolf J Streif CEO/CTO ibeeto +1.855.442.3396 x700____ -- ____ -----____ Rudolf J Streif____ CEO/CTO ibeeto____ +1.855.442.3396 x700____ -- ____ -----____ Rudolf J Streif____ CEO/CTO ibeeto____ +1.855.442.3396 x700____ -- ____ -----____ Rudolf J Streif____ CEO/CTO ibeeto____ +1.855.442.3396 x700____ -- Rudolf J Streif CEO/CTO ibeeto, Streif Enterprises Inc.--
Rudolf J Streif
CEO/CTO
ibeeto, Streif Enterprises Inc.